Why does my RAM say its 800mhz when its actually 1600mhz?

CPU-Z is correct the clock speed is 800 MHz. The modules are DDR (Double Data Rate) in this case version 3, hence DDR3. So the data rate is 1600.

Why is my 1600mhz RAM running at 1333mhz?

bios sets your ram to default setting which is prob in ur case 1333mhz just go to advance AI in bios or twicker settings in bios and select E.M.P file (extreme memory profile) or there will be a tab in there which will range from 800mhz / 1600mhz just select urs.

What is the lowest clock speed for DDR3 RAM?

The clock speed of DDR3 vary from 800 MHz to 2133 MHz. While the minimum clock speed of DDR4 is 2133 MHz and it has no defined maximum clock speed. 8. DDR3 has lower latency than DDR4.

Can I use 1600mhz RAM instead of 800mhz?

No you can’t. If you put two RAM sticks with two different speeds into the laptop, it will not switch on until you take one of them out.

Can I put 1333mhz ram in a 1600mhz slot?

Yes it will run just fine. The slot can handle 1600mhz stock, and more with OC.

What is the default RAM speed?

RAM speed is generally measured in megahertz, usually abbreviated as “Mhz.” This is a measure of the clock speed (how many times per second the RAM can access its memory) and is the same way CPU speed is measured. The “stock” speed for DDR4 (the newest memory type) is usually 2133 Mhz or 2400 Mhz.

What is the voltage of DDR3 RAM?

This will most likely be 1.65v, 1.5v or maybe 1.35v for DDR3, but it may be different if you have low voltage RAM. Finally, look for the DRAM Frequency and then on the drop down list, choose the correct speed for your RAM.

Can I change the timings on a 2133MHz Ram?

However, with higher memory speeds such as 2133MHz, the timings will often be a little higher, so you will need to manually change them. (its worth remembering each board can be worded slightly differently but we are sure you will be able to work it out)

What are the different types of DDR memory speeds?

DDR Memory Speeds and Compatibility. 1 Generations of memory explained. For double-data-rate memory, the higher the number, the faster the memory and higher bandwidth. Occasionally DDR 2 DDR4 speeds. 3 DDR3 speeds. 4 DDR2 speeds. 5 DDR speeds.

What is the default memory timings for 1600Mhz Ram?

Usually, these will default to 9-9-9-24, and a lot of 1600MHz memory already uses these timings, in which case you won’t need to change anything here.