What happens when you reset a Cisco phone?

8841/8851 series desk IP phone A hard factory reset resets all of the parameters of the phone including network and security settings. This is sometimes necessary for troubleshooting or resolving phone issues. Plug in the Ethernet cable. The headset and speaker buttons will light up.

How do I reset my Cisco IP Communicator?

The procedure is as follows:

1. Unplug the power from the phone.
2. As you plug it back it, press and hold the “#” key.
3. When those three buttons start flashing in sequence release the “#” key and enter the following code “123456789*0#”.

What is the difference between restarting and resetting your phone?

If you’re still having a hard time grasping how to remember the differences, consider this: restart is to redo a startup and reset is to set up a new system.

How do I reset my Cisco phone remotely?

Simply add /admin/reboot to the phone’s IP in web URL (e.g. http://192.168.0.51/admin/reboot) and providing there are no active calls, phone will reboot.

Can you factory reset a Cisco phone remotely?

On your computer, launch a web browser and enter the following format in the address bar: http:///admin/factory-reset and then press the Enter key. Note: In this example, the phone has the IP address of 192.168. 2.139 thus, http://192.168.2.139/admin/factory-reset is entered in the address bar.

How do I reset my Cisco phone password?

You can use a query to locate users and reset passwords and PINs to a default value. Step 1 Choose Bulk Administration > Users > Reset Password/PIN > Query. The Reset Password/PIN for Users Query window displays. Step 4 Specify the appropriate search text, if applicable, and click Find.

How do I reset my Cisco IP Phone 7945?

Resolution/Steps

1. Unplug the power cable from the IP phone and then plug it back in.
2. While the phone is powering up, and before the Speaker button flashes on and off, press and hold the hash # key.
3. Continue to hold # until each line button (right of the LCD screen) flashes on and off in sequence in orange color.

How many phones can I reboot in a Cisco Unified CME?

You can reboot a single phone or you can reboot all phones in a Cisco Unified CME system. The differences between reboot types are summarized in Table 1 .

How to use fastfast restart feature in Cisco WLC 5520?

Fast restart feature is supported on the Cisco WLC 5520, 7510, 8510, 8540 and vWLC starting release 8.1. It can be invoked using the CLI by issuing the Restart command or by clicking Save and Restart within the Web-UI HTH

How do I reboot and reregister a SIP phone?

To reboot and reregister one or more SIP phones, including contacting the DHCP server for updated information, perform the following steps. Cisco Unified CME 3.4 or later. The mode cme command must be enabled in Cisco Unified CME. Phones to be rebooted are connected to the Cisco Unified CME router. Enables privileged EXEC mode.