How far away should room mics be?

Room Mic Position #3 The mics should be between 6 to 10 feet in front of the kit, and should sit just on the edge of the kit on the same plane and exactly parallel to each other. The distance is determined by the balance of the kit. Place the mics at the spot where the kit is most balanced.

How close should you be to a condenser microphone?

The ideal distance should be such that the microphone only picks up the sound of your voice while avoiding the other sounds of the room. The appropriate length for the most common microphone (a large-diaphragm condenser) is 6-12 inches away from your mouth.

How far should a mic be from a wall?

And, if you refrain from standing more than the length of your feet away from the mic you can keep the input gain low enough to avoid amplifying ambient room noise captured in the sound. So therefore, the sweet spot we’re probably looking at is anywhere from about 2 to about 12 inches away from the microphone.

What is the best way to mic a room?

Position a mic on each side of the drum set at approximately 10 feet apart. Ensure that both mics are facing the outer edge of the most extreme cymbal. Your room mics should be at least six feet but no more than 10 feet out ahead of the drums. You should make sure your mics are parallel to one another.

How far should a pop filter be from a mic?

For optimal results, mount the pop screen at least 10 cm (4 inches) away from the mic. It’s also a good idea to angle the pop screen slightly; this way you avoid sound reflections bouncing between the capsule and the pop screen.

Where should a vocal mic be placed in a room?

Your 2 rules of thumb for mic placement are:

1. Don’t put the microphone in the exact center of the room.
2. Put the microphone as far away from the walls as possible.

Which type of microphone is good for picking up room ambience?

Rode NT55: Best single microphone for recording ambience. Use more than one NT55 for flexible stereo imaging and for other mixing formats. Zoom H4n Pro: The top microphone/digital audio recorder combo for recording ambience. The H4n Pro is great on its own and for use with other professional microphone pairs.

What is microphone proximity effect?

The proximity effect is a phenomenon that leads to an increase in low frequency response as you move the mic closer to the source. The closer you get, the bigger the bass boost. This can create problems, but at the same time it opens up ways to shape the sound.

What is the distance factor of a microphone?

For a cardioid microphone, the distance factor is 1.7 times the distance used for the omnidirectional microphone. The MXA910 distance factor is an amazing 4.3. In a room where an omnidirectional microphone is used successfully at a distance of 2 feet from the talker, the MXA910 would deliver similar results at a distance of 8.6 feet.

What microphone can I use?

The most common microphones for musical use are dynamic, ribbon, or condenser microphones. Most microphones in use today for audio use electromagnetic induction (dynamic microphone), capacitance change (condenser microphone, pictured right), piezoelectric generation, or light modulation to produce the signal from mechanical vibration.

What is a directional microphone?

A directional microphone is one that picks up sound from a certain direction, or a number of directions, depending on the model involved. In truth, all microphones could be considered directional to a certain degree.

What is the range of a microphone?

The embedded microphone has a range of a full 360 degrees, with a radius of 1.5 square meters.

https://www.youtube.com/watch?v=aL2wMy_a5hM