Questions

How do you send voice messages on Sims?

by Author

How do you send voice messages on Sims?

To Send a Voice SMS

  1. Dial *01XXXXXXXX i.e dial *followed by any mobile number.
  2. Once dialed with the aforesaid order ,you will be greeted with a Welcome Message.
  3. After hearing the “Beep” tone ,start recording your message (maximum length of the message is 2 minutes)

How can I send message through GSM?

Connect a mobile phone or GSM/GPRS modem to a computer / PC. Then use the computer / PC and AT commands to instruct the mobile phone or GSM/GPRS modem to send SMS messages. Connect the computer / PC to the SMS center (SMSC) or SMS gateway of a wireless carrier or SMS service provider.

How do I send a text on SIM900?

SIM900 AT commands

  1. set the SIM900 to text mode: AT+CMGF=1\r.
  2. send SMS to a number: AT+CMGS=PHONE_NUMBER (in international format)
  3. read the first SMS from the inbox: AT+CMGR=1\r.
  4. read the second SMS from the inbox: AT+CMGR=2\r.
  5. read all SMS from the inbox: AT+CMGR=ALL\r.
READ ALSO:   What is CRCP pavement?

How do you send a voice mail?

To record a new greeting:

  1. Open the Google Voice app .
  2. At the top left, tap Menu. Settings.
  3. In the Voicemail section, tap Voicemail greeting.
  4. Tap Record a greeting.
  5. Tap Record .
  6. Record your greeting and when you’re done, tap Stop .
  7. Choose what you want to do with the recording: To listen to the recording, tap Play .

How can I get SMS from GSM module?

RecieveMessage() – is the function to receive an SMS (a live SMS). The AT command to receive a live SMS is “AT+CNMI=2,2,0,0,0” – we just need to send this command to GSM module and apply a 1 second delay. Once you send this command, try sending an SMS to the SIM card number put inside GSM module.

How does GSM SIM900 work?

The SIM900 GSM/GPRS shield uses UART protocol to communicate with an Arduino. The chip supports baud rate from 1200bps to 115200bps with Auto-Baud detection. With the help of jumpers you can connect (RX,TX) of the shield to either Software Serial(D8,D7) or Hardware Serial(D1,D0) of the Arduino.

READ ALSO:   Is NIT Delhi better than Thapar?

Can Arduino send email?

Arduino makes an HTTP request to Webhooks of IFTTT, The Webhooks triggers the email service on IFTTT. The email service on IFTTT sends an email to the email address you specified.

How do you send voice messages on Android?

Here’s what you have to do:

  1. Open up Messaging.
  2. Create a new message to a contact.
  3. Tap the paperclip icon.
  4. Tap Record audio (some devices will list this as Record voice)
  5. Tap the Record button on your voice recorder (again, this will vary) and record your message.
  6. When finished recording, tap the Stop button.