Do I need to shock my pool if I use chlorine tablets?

Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock. Without tabs, the chlorine shock will dissipate quickly out of the water; without shock, the chlorine level will not get high enough to fully sanitize the water.

How much shock Do I put in a 12×30 pool?

Just about any body of water may need shocked from time to time, like if you have algae or after a high bather load. A 12″ x 30″ pool would have to be 80 feet deep to hold 1500 gallons.

How much chlorine does a 12×30 pool need?

Easyset / Inflatable Ring Pools

Pool Size (Diameter x Depth)	Capacity (Gallons)	Chlorine Bleach (Oz / Cups)
10′ x 30″	1,081	14oz / 1.75C
12′ x 30″	1,485	19.5oz / 2.5C
12′ x 36″	1,779	23oz / 3C
15′ x 33″	2,587	33.5oz / 4.25C

How many chlorine tablets do I need to shock my pool?

To use the right number of tablets, always round your pool volume up to the nearest unit of 5,000 gallons. For instance, your pool has a capacity of 20,000 gallons, you would add four chlorine tablets. But if your pool holds just 16,000 gallons, you’d still use four, three-inch chlorine tablets.

Do I add chlorine or shock first?

This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.

Do kiddie pools need chlorine?

According to experts at Pool Solutions, you need four things to keep your kiddie pool clean and safe swim after swim after swim: A stabilized form of chlorine that’s 55\% to 62\% active strength. The chemical name you’re looking for here is either sodium dichloroisocyanurate or sodium dichloro-s-triazine trione.

Can I use 3 inch chlorine tablets in small pool?

Overall, 3-inch stabilized chlorine tablets are best for outdoor use, while unstabilized 1-inch tablets are ideal for small indoor pools and spas.

How long does a 3 inch chlorine tablet last?

Typically, a 3-inch pool chlorine tablet is designed to chlorinate from 7,500 to 10,000 gallons of water per week, meaning it’ll take seven days to dissolve. If you have a 30,000-gallon pool, you’ll need to place three 3-inch pool chlorine tablets in a chlorinator or floater.

Do small pools need a pump?

Without regular cleaning, a small pool can get dirty and covered with bacteria or algae, especially if you do not have a filter. It is not necessary to have a filter or pump with a small pool and often these additions are expensive.

Can you use regular chlorine tablets to shock a pool?

Typically, you will not use regular chlorine tablets as pool shock chlorine. Calcium Hypochlorite: Also referred to as cal hypo, this chemical is one of the least costly and most convenient ways to shock your pool. It’s usually sold in granular form. Needs to be dissolved before you add it to the pool.

How much shock do I need for a 10000 gallon pool?

You’ll also need to know your pool size in gallons, and do some math to multiply these amounts (based on 10,000 gallons) for the size of your pool. Oh, and in case you have forgotten, there are 16 ounces to a 1 pound bag of shock, and 128 oz in a gallon of bleach.

How much dichlor should I add to my Pool?

According to the PoolCalculator adding 1lb of Dichlor to a 2500 gal pool would raise FC by 27, raise CYA by 24 and lower pH by 1. You are now over 2x shock level (12ppm) and have a decent amount of stabilizer. This should buy you plenty of time until you receive your test kit.

When should I Shock my Pool for chloramines?

Chloramines form when the chlorine in the pool mixes with the nitrogen in sweat, oils and urine. However, smell alone does not dictate when you should shock your pool. In general, you should shock your pool when: Algae begins to grow in your pool. The free chlorine level of your pool measures zero.