Questions

Why do my ball joints keep going bad?

Why do my ball joints keep going bad?

Why replace ball joints? Ball joints deteriorate if dirt, grit and impurities get inside or grease escapes, leading to a lack of lubrication. Added to this, rusting and general wear and tear also damage these suspension parts.

Does Honda Pilot have ball joint issues?

As far as I know there are not any major issues with Honda’s ball joints. Be careful what you read on the internet. You can pick almost any expensive problem and find 10 people complaining about the same repair.

How often should ball joints be replaced?

Generally speaking, you should expect to have to have your ball joints replaced between 70,000 to 150,000 miles of driving. Excessive play in the joint can cause additional wear, and if a ball joint fails, your car’s suspension could collapse and you could lose control of the vehicle.

READ ALSO:   How much time do you do on a 2 year sentence in Texas?

Should I replace upper and lower ball joints at the same time?

Q: Should I Replace All Ball Joints at the Same Time? A: Plenty of mechanics will recommend that you replace both the upper and lower ball joints at the same time. They may also recommend checking related components at the same time, such as the stud hole in the steering knuckle.

How much is Honda Accord ball joint?

Honda Accord Suspension Ball Joint Replacement Cost Estimate. Labor costs are estimated between $113 and $143 while parts are priced between $54 and $111. This range is based on the number and age of Honda Accord’s on the road.

Should I replace control arm or ball joint?

There are several reasons why a control arm needs to be replaced. The most common reason is when a ball joint wears out, and it cannot be replaced separately. A worn-out ball joint can pop out causing the vehicle to lose control while driving. This means that a vehicle with a worn-out ball joint is unsafe to drive.

Do new ball joints make a difference?

Do ball joints have to be replaced in pairs? No, it’s not necessary, however, often when one ball joint is bad the other could be worn out too. In pickup trucks with double-arm front suspension, the upper and lower ball joints on one side are often replaced at the same time if the labor overlaps.

READ ALSO:   Is putting fruit in water bad?

Is replacing ball joints hard?

From that standpoint, yes, it is hard to replace ball joints – more than basic DIYr skills and tools are required. There is also the safety dimension for being in close proximity to a suspended vehicle, and a compressed spring that has enough force to cause serious harm if it comes loose.

How can you tell if you have a bad ball joint?

Symptoms of loose ball joints Sound — Usually the first indication of worn or loose ball joints will be a faint, intermittent clunking noise that seems to be coming from a corner of your vehicle. The sound may be more pronounced when going over a bump or a dip or when going around a corner.

How long can you drive with a bad lower ball joint?

short answer is… it depends on how bad they are. the lower ball joint typically gets more wear than the upper. i’d say, if there’s just a little wiggle in either joint, you should have no problem driving 500 miles.

Are there any problems with the front suspension on a Honda Accord?

Honda Accord owners have reported 34 problems related to front suspension lower ball joint (under the suspension category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Honda Accord based on all problems reported for the Accord.

READ ALSO:   How do football clubs send money to each other?

How to fix a loose ball joint on the front suspension?

The only way to correct this would be to redesign the front suspension steering knuckle and lower control arm. The ball joint should be pressed into the socket with weight on the wheels not pulling it apart.

What are some of the problems with the 2004 Honda Accord?

See all problems of the 2004 Honda Accord . As I slowed to make a u-turn (turning the steering wheel left) on a residential street, the right front lower ball joint broke. The car collapsed on to that wheel and the engine stalled. The right axle was pulled out in the process.

What would cause a 1997 Honda Accord to stall at 35 mph?

The approximate failure mileage was 120,000. The front suspension, control arm and lower ball joints are becoming worn and causing loose suspension. The contact owns a 1997 Honda Accord. While driving approximately 35 mph, the drive shaft disengaged because the left ball joints failed. This condition caused the engine to stall.