What to check before using a forklift?

What Should Go Into a Toyota Forklift Daily Checklist?

1. Check fluid levels (oil, water, and hydraulic fluid, for example)
2. Check for leaks, cracks and visible defects everywhere on the forklift.
3. Check mast chains visually; avoid the use of hands.

How do you find the best way to secure an attachment to your forklift?

Always secure attachments properly to the forklift according to manufacturer instructions using the manufacturer-supplied chains or pins, specifically designed for this purpose.

What is a pre-use inspection?

First and foremost, the purpose of a pre-use inspection is to ensure that the machine is safe to operate. A defective machine could easily endanger the life of its operator, as well as the lives of laborers working in close proximity to it.

What are 3 fluid levels that need to be checked before using the forklift?

Check of liquid Levels:

• Hydraulic fluid.
• Brake fluid.
• Engine oil coolant.
• Battery.
• Fuel.

What is a jib attachment used for?

A forklift jib is a common type of attachment for forklift trucks. Forklift jibs are designed to slide and secure easily onto forklift tines. They usually have a hook at the end of the jib for quick attachment to the load. The main purpose of a forklift jib is to easily attach to, lift, and transport a load.

What is a forklift attachment?

Attachments allow your forklift to become more efficient and versatile with handling unique material handling products. An attachment can enable a lift truck to push, pull, clamp, lift, side shift and rotate any load imaginable.

What should you do before lifting a load on a forklift?

How should you raise the load?

1. Check that the overhead clearance is adequate before raising loads.
2. Do not raise or lower the fork unless the lift truck is stopped and braked.
3. Lift loads straight up or tilt back slightly.

What must be checked on a Mewp before use?

Check all stabiliser legs and extendable parts are operational before use. A full risk assessment should be carried out at the site of any job to identify any potential hazards such as overhead power lines or underground services, and to check the ground conditions.

Why should you do a visual check of the forklift before use?

Visual checks: Obvious signs of damage to the body and overhead guards. Obvious signs of damage to the mast, lifting assembly and attachments. Forklift tynes and backrest for cracks and fractures. Hydraulic hose, unions, cylinders for leaks or damage.

What is a pre-use inspection checklist for a forklift?

Daily Pre-use Inspection Checklist Daily forklift inspections are necessary to mititage the risks of operating forklifts. Before using the forklift each day, the operator must conduct and document a pre-use inspection. This Pre-use inspection checklist includes a visual check and an operational check.

Does OSHA have a forklift checklist?

OSHA provides sample forklift checklists for internal combustion and electric trucks, but operators should refer to the owner’s manual, specifications, and manufacturer’s recommendations to modify them and suit other workplace needs. OSHA also requires all forklift defects to be reported immediately and qualified mechanics should correct them.

When are forklifts not safe to use?

The Occupational Safety and Health Administration (OSHA) requires all industrial trucks to be examined before using them, and forklifts should not be used when the inspection reveals any condition adversely affecting the safety of the vehicle.

What is a forklift app and how does it work?

A forklift app enables you to instantly send reports (with complete attachments and notes) to whoever needs them via email or the app itself. You also have the power to remotely schedule and assign tasks (e.g. monthly or quarterly maintenance schedules) to your operators within the app’s central dashboard.