What is the purpose of a line out?

Alternatively referred to as audio out and sound out, the line out jack is found on computer sound cards. It allows external speakers, headphones, or other output devices to connect to the computer, transferring computer generated audio to the devices so that it can be heard.

Is line out same as speaker out?

Line Out is an output port meant to deliver line-level signals from one device to another. On the other hand, Speaker Out is an audio output that delivers an amplified audio signal meant to drive speakers and get them to work.

Is line out same as pre out?

Line out is *normally* a fixed voltage signal unaffected by the volume control. Pre-out is normally a variable signal since it is intended to be connected to a power amp, in this case adjusting the volume control adjusts the output signal level as a power amp is traditionally fixed gain.

Can I connect speaker out to line in?

3 Answers. You can safely connect the Green (normally “Line Out”) to the Blue (normally “Line In”). The Pink (normally “Mic”) input is generally designed to handle more amplification and since line-out operates at higher levels, you would likely overdrive the signal and not be able to hear anything anyways.

What is line out on a radio?

A: A line output converter, or LOC for short, converts a speaker-level output signal into an RCA preamp-level signal. This lets you connect the radio to the amplifier. It can also be used to connect a new radio to a car’s factory amp (see below).

Do I plug speakers into line out?

Plug the speaker cable into the green “Line-out” jack of a desktop computer. Often, this cable will also have a green colored connector. Plug the speaker cable into the headphone jack of a laptop.

What is line out on a stereo receiver?

Line out is simply a non-amplified audio signal, all of the pre-outs can also be called line outs.

How do I connect my power amp to receiver without pre-outs?

How do you connect an amplifier to a receiver without pre-outs?

1. Option #1- Connect through speaker outputs. Almost all receivers come with speaker outputs.
2. Option #2- Connect through tape-out.
3. Option #3- Connect through AUX.
4. Affordability.
5. Fewer cabling.

Can I connect line out to aux IN?

If you have an line level RCA audio output it should work fine into any aux input. If the aux input has a 3.5mm stereo mini jack then you will need a cable with 2 RCA at one end and the stereo mini plug at the other. They also make adapters if you already have a cable you want to use.

Can I use Lineline out of an amp?

Line out of an amp is the right thing to connect to a line in of a device. If the input of the laptop is not designated as a line input, it will be dsigned for a microphone, and may not work too well.

What does speaker out and line out mean?

so you would plug the speaker out into a speaker cabinet, and the line out into the line input of a mixer or something. speaker out sends a speaker level amplified signal. line out sends a line level signal. so you would plug the speaker out into a speaker cabinet, and the line out into the line input of a mixer or something.

What is a line out on a Hughes AMP?

Hughes and Kettner amps have their original simulated line out to go direct to PA/recording. These outputs have fairly decent sound- although many still prefer a microphone in front of the amp. Rule of thumb is “line out” needs to go to another amp or more processing. Some amps (mesa) call this slave out.

What is a line-out jack on an amplifier?

Many manufacturers now include a line-out jack on their amplifiers for this reason. Line-out jacks are usually found on the rear panel of the amplifier, near the speaker outputs. Line-out jacks typically accept standard quarter inch phono plugs, and in some cases, XLR connectors. There are three primary uses for line-out jacks.