What is the longest directional bore?
Table of Contents
What is the longest directional bore?
To meet the fuel demands of the expanded Hong Kong International Airport (HKIA), new twin aviation fuel pipelines were installed using horizontal directional drilling (HDD) by Langfang Huayuan Mechanical and Electrical Engineering Co., Ltd.
How long is directional boring?
How long will HDD construction take? Completion of each siphon will take approximately 4-6 weeks. This includes about 3-4 weeks of drilling and 1-2 weeks to pull the pipe back.
How much does a directional drilling company make?
While ZipRecruiter is seeing annual salaries as high as $100,000 and as low as $12,000, the majority of Directional Driller salaries currently range between $43,000 (25th percentile) to $60,000 (75th percentile) with top earners (90th percentile) making $70,500 annually across the United States.
How long has directional drilling been around?
Directional drilling began emerging in the late 1920’s when curvey instruments were developed that could measure both inclination and azimuth. The first controlled directional well was drilled in California in 1930 to tap offshore oil reserves.
How much does a directional drill cost?
3.1 Construction Cost
| Service/Product | Price-Low | Unit |
|---|---|---|
| Directional Boring – Rural | $6.00 | Foot |
| Directional Boring – Urban | $8.00 | Foot |
| Directional Boring – Rock | $42.50 | Foot |
| Conduit (2” HDPE) | $0.75 | Foot |
What is horizontal directional drilling?
Horizontal Directional Drilling in Brief. The HDD process involves drilling a pilot hole in the horizontal direction towards the other end of the planned route. This hole is dug using a steel drilling rod. When the drill head emerges on the other end, a back reamer is attached to the string and pulled back through the hole.
What is the difference between rotary steerable and directional drilling?
Directional drilling by using the mud motor means that often the drill pipe needs to be slid forward while the drill is motionless. A rotary steerable system can drill and steer at the same time. This means that previously inaccessible formations can be accessed.
How do you shape the direction of a drill?
The rotational speed of the drill and the weight and stiffness of the drillstring can also be used to influence direction. One of the original methods was jetting, a high-pressure nozzle shot water or drilling fluid from one edge to the drill bit, creating a weaker side in the formation. Another traditional method was to use a whipstock.
How does a straight ahead drilling motor work?
After the motor is installed, the bit and pipe are lowered back down the well, and the bit drills a path that steers the well bore from vertical to horizontal over a distance of a few hundred feet. Once the well has been steered to the proper angle, straight-ahead drilling resumes and the well follows the target rock unit.