What is the connector on the end of a wire called?

It is called terminal, this is used to connect circuit boards, they can fit inside plastic components called connectors in order to facilitate multiple connections. The way you attach the terminals onto the wire can be by directly crimping these terminals or by ultrasonic welding or tin solder.

What is a ferrule crimp?

A crimp ferrule – also known as a wire ferrule and electrical ferrule – is a soft metal tube that is crimped onto the end of a stripped wire to protect the strands inside a terminal from fraying. Most ferrules are made of copper.

What are the metal parts of a plug called?

A plug consists of the case or cover, three pins, a fuse and a cable grip. The case of a plug is the plastic or rubber parts that surround it. Plastic or rubber materials are used because they are good electrical insulators. The pins inside the plug are made from brass because brass is a good conductor of electricity.

What is crimp connector?

Crimp connection is a gas-tight joint formed by compression between electrical components (most often wires and cables) and a specifically designed crimp termination or splice band. Compressed terminal reshapes all strands in a wire like it is cold-welded to create a low resistance solderless electrical connection.

What is a cannon plug?

A plug and socket used in professional audio equipment, lighting controls (see DMX512) and other applications. It uses a balanced connection and locks into the socket. XLR connectors are twice the size of the standard RCA plugs and sockets found on consumer equipment. See analog stereo. Hot Plugging.

What are the different types of connector?

Electrical connectors are classified into three types based on their termination ends: board-to-board connectors, cable/wire-to-cable/wire connectors, and cable/wire-to-board connectors.

What is brass ferrule?

Made of soft brass or copper when used in MDPE pipes, or plastic when used in PVC piping, it is commonly called a compression fitting or a compression ring bushing. …

What is a bootlace ferrule?

Bootlace ferrules are copper tubes that are often used for creating a reliable electrical connection, at the end of electrical wires. Bootlace ferrules are available in a lot of types and sizes, and are used for a broad range of applications.

What are the parts of plug socket?

Parts of the Electrical Plug and their Function

• i. OUTER SHELL: it is usually a rubber or plastic case or compartment.
• ii. LIVE WIRE: It is brown in colour and it is connected to the live pin.
• iii. NEUTRAL WIRE: It is blue in colour and connected to the neutral pin.
• iv. EARTH WIRE: It has green and yellow strips.

What are the types of crimp connectors?

Crimp shapes

• C crimp.
• D crimp.
• F crimp (a.k.a. B crimp)
• O crimp.
• W crimp.
• Overlap/OVL crimp.
• Oval (confined) crimp.
• Four-Mandrel crimp.

What are cannon plug pliers used for?

Slip-joint designed handles and serrated replaceable plastic jaws make installation and removal of electrical connectors easier and safer. Grips on smooth, serrated, or oily surfaces, eliminating damage to connector lock rings.