What is Extrude command in Creo?
What is Extrude command in Creo?
An extrude feature is based on a two-dimensional sketch. It linearly extrudes a sketch perpendicular to the sketching plane to create or remove material. You can either select the sketch first then start the Extrude tool, or you can start the Extrude tool and then select the sketch.
What is the extrude feature used for?
Use Extrude to create parts or surfaces. This video will show you how to use the Extrude feature tool on the sketch or feature toolbar. Extrude adds depth to a selected region or planar face along a straight path.
What is difference between one side and both side in extrusion?
17) What is the difference between One Side and Both Sides in extrusion? One-side extrudes only one specified direction from the sketching plane. Both sides extrudes both sides of the sketching planes.
How do you extrude a surface in Creo?
- Click Model > Extrude.
- Select a sketch to extrude, or to create a sketch, click the Placement tab, click Define, sketch a section, and click OK.
- To create a surface, click .
- Select a depth option from the menu:
- To flip the direction of feature creation in relation to the sketching plane, click .
What are the options used in extrude to define depth?
Blind—Extrudes a section from the sketching plane to the specified depth value. Specifying a negative depth value flips the depth direction. Symmetric—Extrudes a section on each side of the sketching plane by half of the specified depth value. To Next—Extrudes a section to the next surface of a solid.
What does the extruded boss base feature do?
An Extruded Boss/Base feature will allow you to take a 2D sketch and add thickness to it in the third dimension. Every few releases, this feature gets some terrific functionality added to it.
What are the options used in Extrude to define depth?
Where is the Extrude on Creo?
On the Model tab, click Extrude in the Shapes group. The Extrude and Sketch tabs open.
How do you extrude the surface in Creo?
How to use extrude feature in Creo Parametric?
Completely Understand Extrude feature in Creo Parametric 1 Solid Extrude. 1) Select the front plane and click at extrude icon . 2 Extrude cut/Add. 1) Now select the cross-sectional surface of your previously extruded model and again click at extrude button. 3 Thicken cut/Add. 4 Tapered.
How do you use the extrude tool in AutoCAD?
It linearly extrudes a sketch perpendicular to the sketching plane to create or remove material. You can either select the sketch first then start the Extrude tool, or you can start the Extrude tool and then select the sketch.
Table of Contents
- 1 What is Extrude command in Creo?
- 2 What is the extrude feature used for?
- 3 What is difference between one side and both side in extrusion?
- 4 What does the extruded boss base feature do?
- 5 What are the options used in Extrude to define depth?
- 6 Where is the Extrude on Creo?
- 7 How do you use the extrude tool in AutoCAD?
- 8 Is it possible to extract an internal sketch from an extrusion?
- 9 How to use tapered extrude in SolidWorks?
Is it possible to extract an internal sketch from an extrusion?
However once you created the feature with only the internal sketch it is not extractable. However, you can use my work-around to create a sketch feature, move it before the extrusion feature and then use that within the extrusion feature to replace the internal sketch. 01-06-2017 01:31 PM 01-06-2017 01:31 PM
How to use tapered extrude in SolidWorks?
To use through selected just click at its respective icon and select the front surface of our first solid extrude. The thicken cut will limit itself up to selected surface. See the right side figure. To use tapered with other advance option of extrude, right click at extrude1 in model of creo parametric and click at “edit definition” option.