What is a IPv6 DHCP?

The Dynamic Host Configuration Protocol version 6 (DHCPv6) is a network protocol for configuring Internet Protocol version 6 (IPv6) hosts with IP addresses, IP prefixes and other configuration data required to operate in an IPv6 network. It is the IPv6 equivalent of the Dynamic Host Configuration Protocol for IPv4.

Should I use DHCPv6?

DHCPv6 servers that assign randomized interface identifiers to end-node devices aid in the protection of the network from attacker reconnaissance attempts. Therefore, organizations should use DHCPv6 servers that are capable of providing randomized interface identifiers to lease requests.

What is the difference between DHCPv4 and DHCPv6?

DHCPv4 – The administrator enables DHCP for each interface. Administration is on a per-logical interface basis. DHCPv6 – Explicit configuration is not necessary. This protocol is enabled on a given physical interface.

What advantage do you think stateful DHCPv6 has over stateless DHCPv6?

In this context stateless means that no server keeps track of what addresses have been assigned by which hosts and what addresses are still available for an assignment. A stateful DHCPv6 server provides IPv6 addresses and “other information” to hosts. It also keeps track of the state of each assignment.

What is the DHCPv6 rapid commit?

In Rapid-Commit mode , the DHCP client obtain configuration parameters from the server through a rapid two message exchange (solicit and reply). So unlike the normal commit, the two-message exchange provides faster client configuration, and is beneficial in environments in which networks are under a heavy load.

What are the alternatives to using DHCP?

There are five alternatives to Free DHCP Server for Windows, Linux and Windows S. The best alternative is Serva 32/64 , which is free. Other great apps like Free DHCP Server are TFTPD32 (Free, Open Source), Open DHCP Server (Free, Open Source), AOMEI PXE Boot (Paid) and ISC DHCP (Free, Open Source).

How do you enable your Ethernet connection for DHCP?

Part 2 of 2: Enabling DHCP Open a web browser and enter your router’s address. Doing so will take you to your router’s page. Log into your router’s page if prompted. Some routers are protected by a username and password. Open your router’s settings. Find the DHCP section. Enable DHCP. Save your settings.

What are the advantages of using DHCP?

DHCP offers the following advantages: IP address management – A primary advantage of DHCP is easier management of IP addresses. In a network without DHCP, you must manually assign IP addresses. Centralized network client configuration – You can create a tailored configuration for certain clients, or for certain types of clients.

What ports are used by DHCP and the DHCP clients?

The DHCP server operates on UDP port 67, and the DHCP client operates on UDP port 68. These are privileged ports, and they are reserved for DHCP only.