What is a 6013 electrode?

DESCRIPTION: 6013 is a high titanic coated electrode. This electrode was primarily designed to provide good wetting and shallow penetration for thin sheet metal applications (using smaller diameter electrodes), but with sufficient penetration for welding medium gauge steel.

What metal is used in welding rods?

Welding rods often utilize alloys of several materials. According to online welding informational resource Welding Technology Machines, the three most common welding rods allow for joining or building up various steel alloys: copper coated mild steel alloy, high carbon steel alloy and 3 percent nickel steel alloy.

What metal is used to coat the electrode?

Some of the most prominent alloys and materials used as electrode materials are copper, graphite, titanium, brass, silver, and platinum. Copper is second only to silver in terms of bulk electrical conductivity. Copper has better strength than silver, but offers inferior oxidation resistance.

What are arc welding rods made of?

What are welding electrodes made of? A welding electrode is created from two components: the true metal and also the flux coating. The alloy may differ from mild-steel, cast iron, stainless steel, high-tensile steel, bronze, aluminum, aluminum, or aluminum.

What is E6013 good for?

What can you do with the E6013 welding rod? This rod is good for filling on multi pass welds where layer after layer is going to be needed to make the weld. Though penetration is more shallow, it only needs to bond with the metal laying directly underneath it to provide a quality weld.

How strong is 6013 welding rod?

The tensile strength of a welding rod can be determined by the first two numbers in the electrode’s name. In this case that is 60, so the maximum tensile strength of the 6011 and 6013 electrode is 60,000 psi.

What type of welding rod is used for stainless steel?

A 309 or 312 SMAW electrode is a good choice for stick welding stainless steel, especially for maintenance or repair applications. It offers high cracking resistance and good strength, and typically can join stainless steel already in service, even if the specific material grade isn’t known.

Is 6013 welding rod AC or DC?

6013 electrodes may be used in any position with AC or DC (straight or reverse polarity). recommended. Operate by holding a short arc or using the drag technique.

What does E6013 mean?

E6013 electrodes are classified according to ASME Section IIC, 5.1 Specification for Carbon steel electrodes for Shielded metal arc welding or E4313 as per CSA W48 or SFA 5.1M. Similar to other welding electrodes, each digit in E6013 electrode have its own meaning.

What are the materials used in E6013 electrodes?

Coverings of E6013 [E4313] electrodes contain rutile, cellulose, ferromanganese, potassium silicate as a binder, and other siliceous materials. The potassium compounds permit the electrodes to operate with ac at low amperages and low open-circuit voltages.

What is an E6013 welding rod used for?

The E6013 welding rod is a multi-purpose rod suitable for welding of mild steel, galvanized steel, and some low alloy steels. Although its coating generates a very stable, forceful spray-like arc, this electrode is not as deep penetrating as the E6011 which can penetrate thick or unclean material.

Why it is known as the 6013 electrode. There are many different types of electrodes used in the shielded metal arc welding, (SMAW) process. Arc welding electrodes are identified using the A.W.S, (American Welding Society) numbering system and are made in sizes from 1/16 to 5/16 .