What is a 1N4007 diode used for?

The 1N4007 is a used general-purpose diode. It is normally constructed to be used as a rectifier in the power supply section of electronic devices to convert AC voltage to DC voltage with other filter capacitors.

What does 1N4001 stand for?

What is 1N4001 means: 1N4001 series diodes are 1 Ampere current handling general purpose rectifier diode. 1N is stands for American standard semiconductor (Generic name) with ONE JUNCTION. 400X Series like 4001,4002 to 4007 is indicates the voltage, current and power rating of the diodes.

What is the difference between 1N4001 and 1N4007 diodes?

Differences are : Peak Repetitive Reverse Voltage of 1N4001 is 50V while that of 1N4007 is 1000V. RMS Reverse Voltage of 1N4001 is 35V while that of 1N4007 is 700V. Typical Junction Capacitance of 1N4001 is 15pF while that of 1N4007 is 8pF.

Is 1N4007 a silicon diode?

The 1N4007 belongs to a sort of 1 A general-purpose silicon rectifier diode, commonly used in AC adapters for common household appliances. So we can use this diode in circuits that are designed for less than 1A. The reverse current is 5uA which is negligible but it can withstand reverse voltage peak up to 1000V.

What is M7 diode?

The M7(1N4007) Diode is a M7 Surface Mount General Rectifier and has a Plastic Passivation Junction Reverse Voltage of 50 to 1000 Volts with Forward Current of 1.0 Ampere. The following features are: • The plastic package carries underwriters Laborator. • Flammability Classification 94V-O.

Can I use 1N4001 instead of 1N4007?

Yes. The 1N4007 can withstand a higher reverse voltage(Vr), 1000V vs. 50V.

What is 1N4004?

1N4004 is a rectifier diode with the maximum current carrying capacity 1A and it withstand peaks up to 30A.

What type of diode is 1N4007?

rectifier diode
1N4007 is a rectifier diode, designed specifically for circuits that need to convert alternating current to direct current. It can pass currents of up to 1 A, and have peak inverse voltage (PIV) rating of 1,000 V.

Can I use 1N4001 instead of 1N4002?

The difference between a 1N4001 and 1N4002 and 1N4003 and 1N4004 and so on up to 1N4007 is just the voltage rating; they are all 1 Amp rectifiers, starting with the 1N4001 with a 50 V PIV rating, then 100 V for the 1N4002, 200V for the 1N4003 and so any of the types: 1N4003, 1N4004, 1N4005, 1N4006 or 1N4007 would be a …

What is SS14?

SS14 is a surface mount High Power Schottky Rectifier with a Low voltage drop of 0.5V and a high forward current of 1A. The Diode has high efficiency and High surge current capability of 30A. It is commonly used in high-frequency Inverters, Polarity Protection applications etc.

What is SMD diode?

SMD means surface mounted diode. This is a better technology than the first generation DIP LEDs. The SMD type LEDs are mounted on an aluminum substrate and enveloped in an epoxy resin.

What is the difference between 1n 4007 and N 4007?

Its an American standard numbering system standard used for semiconductor devices. This standard has been adopted globally now. In 1N 4007 the first part 1N indicates single junction semiconductor. 1N indicates 1 junction whereas N indicates the semiconductor diode . 4007 is the specific number to indicate the particular diode.

What is the meaning of 1n 4007 rectifier?

In 1N 4007 the first part 1N indicates single junction semiconductor. 1N indicates 1 junction whereas N indicates the semiconductor diode . 4007 is the specific number to indicate the particular diode. From the electrical point of view, 1N 4007 is compatible with other rectifier diodes.

What is the difference between 4001n and 4007 series of transistors?

1N stands for uni junction ( pn junction diode). Diodes have a single junction whereas transistors have two junctions ( since they have three regions namely base, emitter and collector) 4007 is just the specific series number.There are others like 4001,4002,4003 etc.

What is a 1N4007 diode?

It is a surface mount part. The 1N4007 is a part with leads, 1 ampere, 1000 volt standard silicon diode. It has a reverse recovery time of 2 us (a long time) . It will not work well in a high speed switching supply. It is made for lower frequency high voltage applications.