What happens when chlorobenzene reacts with Sulphuric acid?

Chlorobenzene reacts readily with chlorine, nitric acid, or sulfuric acid, forming dichlorobenzenes, chloronitrobenzenes, or chlorobenzenesulfonic acids, respectively, and with chloral in the presence of sulfuric acid to form DDT, an insecticide.

What happen when chlorobenzene is treated with?

(i) When Chlorobenzene is treated with \[C{l_2}/FeC{l_3}\], it will give 1,2-Dichlorobenzene and 1,4-Dichlorobenzene.

What happen when chlorobenzene is treated with ammonia?

When chloro benzene is heated at a high temperature of about 202 degree Celsius (or 475 Kelvin), along with Ammonia (NH3) and in the presence of Cuprous oxide (Cu2O), at an atmospheric pressure of 60 mm, then the products formed at the end of the chemical reaction will be Aniline, Water (H2O) and Cuprous chloride ( …

What is the action of chlorobenzene on conc HNO3?

When chlorobenzene reacts with concentrated nitric acid, the process of nitration takes place.

What is raschig reaction?

From Wikipedia, the free encyclopedia. The Raschig–Hooker process is a chemical process for the production of phenol. The main steps in this process are the production of chlorobenzene from benzene, hydrochloric acid and oxygen, and the subsequent hydrolysis of chlorobenzene to phenol.

What happens when chlorobenzene is treated with nitrating mixture?

When chlorobenzene is treated with concentrated nitric acid and concentrated sulfuric acid, it results in the formation of two products. the products are 2-Nitrochlorobenzene and 4-Nitrochlorobenzene. The chemical equation for the above reaction is given in the image below.

What will happen when chlorobenzene reacts with a mixture of conc hno3 and conc h2so4?

Explanation: When chlorobenzene is treated with concentrated nitric acid and concentrated sulfuric acid, it results in the formation of two products. the products are 2-Nitrochlorobenzene and 4-Nitrochlorobenzene.

What is conc hno3 action?

But the concentrated nitric acid oxidizes non-metal such as carbon, sulphur, iodine, etc to their corresponding oxy-acids, and nitric acid itself is reduced to nitrogen dioxide. Hence we can say that the nitric acid oxidized carbon to carbon dioxide.

How phenol is prepared by Raschig process?

The Raschig–Hooker process is a chemical process for the production of phenol. The main steps in this process are the production of chlorobenzene from benzene, hydrochloric acid and oxygen, and the subsequent hydrolysis of chlorobenzene to phenol.

What is the purpose of Raschig rings?

Raschig rings are cylinders made from ceramics, metal or plastic, and are used to increase efficiency in gas, petroleum and chemical refinery towers. The rings are packed randomly into the tower to increase the surface area available for chemical reactions.

What is the compound formed on heating chlorobenzene with chloral in sulphuric acid?

The compound formed on heating chlorobenzene with chloral in the presence of concentrated sulphuric acid is (d) hexachloroethane. Please log in or register to add a comment.

When chlorobenzene is treated with nitrating mixture, nitration will occur. Halogens are ortho and para directing so we will get a mixture of Nitration will happen. 30\% o-product and 69\% p-product.

What happens when Zn reacts with H2SO4?

Reaction of Zn with H2SO4 depends on concentration of acid. For dilute acid, zinc sulphate and hydrogen gas at produced. For concentrated sulphuric acid, zinc sulphate , Sulphur dioxide and water are produced.

What is the reaction between chlorobenzene and Koh?

Chlorobenzene is nothing but a chlorine atom attached to one of the six carbons in the benzene ring. When this reacts with KOH which is a base ( and it obviuosly gives OH-) The potassium cation combines with the chlorine anion from chlorobenzene to give KCl salt and phenol ( aromatic alcohol- OH grp attached to the carbon in the benzene ring).