What happens if two WIFI networks have the same SSID?

Two identically named SSIDs with the same password will allow your device to connect to either, without having to add any extra networks on your devices. If both routers are broadcasting from the same location, the expected behaviour will vary depending on device.

Should all access points be on same channel?

When APs have overlapping coverage they should be set to different non-overlapping channels. This prevents the APs from causing an increase in channel utilization or interfering with each other. The goal of using different non-overlapping channels is to avoid the affects caused by channel utilization and interference.

Is it worth splitting SSID?

Splitting your Hub’s SSID isn’t something we’d recommend – most new devices work well with dual-band wi-fi. Most new devices work well with dual-band wi-fi. But if you’re having problems, you can try creating another wireless network by splitting your Hub’s SSID.

Should you use the same SSID for 2.4 GHz and 5Ghz?

Almost all current wireless devices support both 2.4Ghz and 5Ghz frequencies. Older 2.4Ghz only devices will just connect to the 2.4Ghz frequency and not even see the 5Ghz frequency, so having the same SSID will work fine for them.

Should access point have same SSID Reddit?

Normally you want the same SSID so your devices know both APs are the same network. That way your devices can roam as they see fit. Now some devices are good at roaming and some suck at it so it won’t be a sure thing. However with two different SSIDs your devices will never roam unless they lose connection entirely.

Should same channel have same SSID?

Nothing wrong with this as long as the access points use non-overlapping channels. If the channels do overlap it could cause a situation where their access points interfere with each other. This can cause packet loss during browsing and a negative internet experience for those using your WiFi network.

Should SSID be the same for 2.4 and 5GHz?

Should 2.5 or 5GHz separate?

Separating the bands of the router may help you to maximise the WiFi speeds around your home. 2.4Ghz (gigahertz) can cover a further distance from the router, however the connection speeds are slightly slower. 5Ghz covers a shorter distance from the router, but the speeds are faster.

What are the different types of wireless access points?

This article gives a small brief about the various types of Wireless Access Points available in the market – Single radio, dual radio, external antennas, internal antennas, a, b/g, b/g/n technologies, support for mesh networking, stand alone, controller based access points and support for multiple services.

Are routers and access points the same thing?

Wireless access points (AP) and routers are often thought of as the same thing. A wireless access point is similar to a router but there are some differences. What is a Wireless Access Point? AP (Access Point) have evolved over the years to mean something different than they did in the early years of WiFi.

How do multiple SSIDs provide security?

In Multi-SSID mode, the access point creates multiple wireless networks to provide different security and VLAN groups. This mode is suitable when you want your devices connected to different wireless networks and become isolated by VLANs.

What is the purpose of the SSID?

SSID (Service Set Identifier) is the term that describes the wireless network name. It distinguishes between networks that may be in range of a device being used to connect to the Internet via wireless connection. The SSID is commonly confused with the network security password. However, it is not used for that purpose.