What does the red lock mean on my KitchenAid dishwasher?

Is the Control Locked Light On or Flashing? If the Control Lock feature has been enabled, the Control Lock light will flash 3 times indicating that it is activated. If the dishwasher has a dedicated Control Lock button in the Options selections, press and hold CONTROL LOCK for 3 seconds.

How do you turn off child lock on KitchenAid dishwasher?

All of the sudden our KitchenAid (Model #KUDS25SHBL1) dishwasher’s “Child Lock” light is on and blinking and we can’t get it to turn off. Per the manual, the only way for this “Child Lock” light to be activated on & off is to hold down the “Energy Saver Dry” button for 4 seconds.

How do I reset the control panel on my Kitchenaid dishwasher?

To reset the dishwasher control panel, it needs to be disconnected from the power source for one minute. If your dishwasher is plugged into an outlet, simply unplug the unit for one minute and then plug the unit back in.

How do I unlock my dishwasher door?

A locked dishwasher is simple to fix most of the time and shouldn’t take you longer than a few seconds to sort out. To unlock a dishwasher, you should hold down the button under the lit lock sign for three seconds until it turns off. Otherwise, you may need to repair the door.

How do I reset my Kitchenaid dishwasher control panel?

How do I reset my Kitchenaid dishwasher control board?

Control Panel and Function Reset Hit the Hi-temp Scrub and Energy Saver Dry buttons individually until each button has been hit at least five times. Let the unit settle for ten minutes to allow it to reset. Once you are done pressing the reset sequence, expect to see the lights on the display panel flash.

What does loc mean on dishwasher?

dishwasher door lock error
Error Code #LOC The LOC or loc code represents a dishwasher door lock error.

How do you unlock child lock in dishwasher?

How do I set the child lock feature?

1. To prevent children from accidentally changing the dishwasher settings or starting the dishwasher, you can lock the controls.
2. Press and hold DELAY START for 3 seconds.
3. To unlock the controls, press DELAY START again for 3 seconds, and the indicator light will go out.

What is a child lock on a dishwasher?

Per the Use and Care Manual for the 100 Series Dishwasher: The child lock feature will lock the panel while the dishwasher is in operation to prevent a wash cycle from being interrupted unintentionally (e.g. by children).

How do I unlock the control panel on my KitchenAid dishwasher?

Press and hold the designated control lock button for your model for 3 seconds. The location of the control lock button may vary depending on your model. Refer to the Owner’s Manual for the control lock button location for your model. The light will turn off and the control will be unlocked.

How do I lock the controls on my Kitchen Aid dishwasher?

NOTE: If your model requires you to press and hold PROSCRUB UPPER, 4 HOUR DELAY, SANI RINSE, or BOTTLE WASH to lock the controls, the Control Lock light will be on when Control Lock is active. In a Kitchen Aid dishwasher, a red lock symbol means that the control locked light is on. That is a way to lock the control panel.

What does the red light on my Bosch dishwasher mean?

From Bosch themselves, they say that the red light simply means that the dishwasher is just running. They are so quiet that they needed to display when it was running. When it goes off, this means the cycles are complete; however, keep the door closed for a little bit because the heat inside is still very hot.

How do I lock the controls on my Kenmore dishwasher?

If the dishwasher has a dedicated Control Lock button in the Options selections, press and hold CONTROL LOCK for 3 seconds (press the words “Control Lock). NOTE: If your model requires you to press and hold PROSCRUB UPPER, 4 HOUR DELAY, SANI RINSE, or BOTTLE WASH to lock the controls, the Control Lock light will be on when Control Lock is active.

How do I Fix my Samsung dishwasher that won’t turn on?

To fix it, press and hold the options key that says “Control Lock Hold 3 Sec” for 3 seconds, or if you have it, the option that says “CONTROL LOCK”. For this to work, it might be necessary to disable sleep mode by pressing start, cancel, or opening and shutting the dishwasher door.