What does a SATA connector look like on a motherboard?
Table of Contents
- 1 What does a SATA connector look like on a motherboard?
- 2 What is SATA cable connector?
- 3 Where is my SATA port?
- 4 What do SATA connections look like?
- 5 Where is the SATA connector on power supply?
- 6 What is the connector that interfaces between the motherboard and the processor?
- 7 What is a SATA power connector?
- 8 What is a SATA hard drive connection?
What does a SATA connector look like on a motherboard?
SATA cables are long, 7-pin cables. Both ends are flat and thin, with one often made at a 90-degree angle for better cable management. One end plugs into a port on the motherboard, usually labeled SATA, and the other (such as the angled end) into the back of a storage device like a SATA hard drive.
What is SATA cable connector?
SATA (also referred to as Serial ATA) stands for Serial Advanced Technology Attachment, an industry-standard bus interface for connecting a computer’s host bus adapter to storage devices such as hard disk drives (HDD), optical drives and solid-state drives (SSD). Serial ATA (SATA) Cable.
Where is my SATA port?
Usually the SATA ports are on the lower right side of the motherboard.
Where is the SATA power cable?
SATA power cables protrude from the power supply unit and are meant to reside only inside the computer case. This is unlike SATA data cables, which are also usually kept behind the case but can also connect to external SATA devices such as external hard drives via a SATA to eSATA bracket.
What are the connectors on the motherboard?
Motherboard Diagram
| 1. CPU socket | 2. Chipset | 3. DIMM/RAM slots |
|---|---|---|
| 4. PCIe x16 slot | 5. PCI x1 slot | 6. M.2 connector |
| 7. SATA ports | 8. Front panel connectors | 9. USB 2. header |
| 10. USB 3.1 Gen1 header | 11. USB 3.1 Gen2 header | 12. ATX power connector |
| 13. CPU power connector | 14. BIOS chips | 15. CMOS battery |
What do SATA connections look like?
A Typical SATA connector. Most cables have identical connectors on both ends; some have an angled connector on one end. SATA Data cables are thin ribbon like cables with small identical 7 pin connectors on each end. The connectors measure no more than 1.5 x 0.4 cm and have distinguishable L-shaped notch for connection.
Where is the SATA connector on power supply?
What is the connector that interfaces between the motherboard and the processor?
2. CPU Socket types. The processor socket (also called a CPU socket) is the connector on the motherboard that houses a CPU and forms the electrical interface and contact with the CPU. Motherboards are subcategorized by the type of processor socket they have.
How do I install a SATA hard drive?
The basic steps required to install a hard drive are: Configure the drive as a master or slave device ( PATA only). Mount the drive in the chassis. Connect the data cable to the drive and to the PATA or SATA interface. Connect a power cable to the drive. Before you remove the case panels to install the hard drive:
How to connect SATA cables?
Power the drive Attach the power cable of your SATA drive to the Molex to SATA Power cable connected to the power supply.
What is a SATA power connector?
The SATA 15-pin power supply connector is one of the standard peripheral power connectors in computers. It’s the standard connector for all SATA-based hard drives and optical drives. SATA power cables protrude from the power supply unit and are meant to reside only inside the computer case.
What is a SATA hard drive connection?
SATA is a computer bus interface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. eSATA is a SATA connector accessible from outside the computer, to provide a signal (but not power) connection for external storage devices.