What determines the size of a radial arm saw?

The size of a radial arm saw is determined by the diameter of its blade. Home improvement stores typically carry models that have 8-inch (20.3 centimeters) to 12-inch (30.5 centimeters) blades. The most popular size is 10 inches (25.4 centimeters), which will cut stock up to three inches thick.

What size blade does a Craftsman radial arm saw use?

ten-inch blades
The saw will lock into any of these paths for precise work. Radial-arm saws are identified by the size of the blade for which they are designed. Like many table saws, most radial-arm saws use ten-inch blades. Typically, they cut stock up to three inches thick and will crosscut pieces more than a foot wide.

How are table saw sizes determined?

Timber band saws are huge machines that can have blades as long as 62 feet. Table Saws: The ripping capacity of a table saw is determined by the distance from the saw blade to the maximum distance the fence can travel to the right side of the saw blade. Common distances are 28, 30, and 50 inches.

How deep can a 10 inch radial arm saw cut?

3-inch
The size of the blade determines the possible cutting-depth of the saw. A 10-inch saw blade cuts to a 3-inch depth.

What height should a radial arm saw be?

Your 6″ to 8″ lift should do it.

What is the difference between a table saw and a radial arm saw?

A table saw features a blade that is built into the table and can be raised from and lowered into it as you work. A radial arm saw blade is mounted on a moveable arm, so that it is suspended above the table.

How deep can a 10-inch radial arm saw cut?

When did Craftsman stop making radial arm saws?

The brand name “Craftsman” and the store name “Sears” are written on the saws. Sears stores and catalogs sold the 8-, 9- and 10-inch saws from 1958 through 1992. The 8 1/4-inch saws were sold from 1990 through 1995.

What size should a table saw table be?

A good table saw should be around 10 inches wide. The industry assumption is that benchtop type tables saw should be smaller, yet we recommend getting something larger. The ten inches dimension is also ideal for mobile job sites that you can move around quickly.

What is a good size for a table saw?

The most common table saw blade size is 10 inches. A larger blade generally won’t make as precise of a cut as a smaller blade, but the larger option is able to cut through thicker materials.

What is a radial arm table saw used for?

Most radial arm saws have a three-part table: The rear table acts as a clamp to hold the rip fence in place. The rip fence supports the wood and keeps it perpendicular to the blade. The front table is the cutting surface. Most cuts on the saw will cut through the fence and the work material and into the front table.

What is a rip fence on a radial arm saw?

The rip fence supports the wood and keeps it perpendicular to the blade. The front table is the cutting surface. Most cuts on the saw will cut through the fence and the work material and into the front table. For most radial arm saws, the rear table and the rip fence are clamped in place between wing bolts at the rear and the front table.

How do you use a radial arm saw to cut MDF?

When installing a new surface, you will need to make sure that the travel of the radial arm saw is parallel with the table surface at all positions. To test this travel, set the angle of the radial arm saw to the 90-degree cross-cut position, then lower the radial arm saw until the blade is barely touching the surface of the MDF.

Does the Craftsman 10 inch radial arm saw work?

I recently came across a Craftsman 10inch Radial Arm Saw in the trash at the curb. Owner said it did’t work, but after a little cleaning I plugged it in and it works fine. All adjustments have been made, and major cleaning.

https://www.youtube.com/watch?v=Zk75qgKTFRo