What can I use instead of muriatic acid in my pool?
Table of Contents
What can I use instead of muriatic acid in my pool?
Alternatives to Muriatic Acid for Swimming Pools
- Sodium Dichlor. Sodium dichlor is a granular or tablet form of chlorine sanitizer with a pH range of 6.8 to 7.0, nearly neutral.
- Trichlor. Trichlor tablets are also effective in reducing or eliminating the need for muriatic acid.
- Sodium Bisulfate.
Can I use vinegar instead of muriatic acid in pool?
Mostly no. The amount of impurities and sugars in vinegar compared to Muriatic Acid or Sodium Bisulfate could cause staining and provide unintended fuel for bacteria and other microorganisms, though the vinegar’s acidity could successfully lower pool water pH levels.
How do you keep a pool clean without chemicals?
3 Ways to Sanitize Your Pool without the Typical Chlorine Risks
- Salt sanitizers (“saltwater pool”) In recent years, saltwater sanitizers have become a popular alternative to off-the-shelf chlorine for treating water in swimming pools.
- Ozone pool purification.
- Ultraviolet pool sanitizing light.
What is the best chemical to clean a pool?
Chlorine is one of the most important pool cleaning chemicals. It is necessary for keeping your pool clean and sanitized. It is the most widely used chemical to keep a pool cleaning and for good reason. When used correctly it should be easy to control and keep your pool healthy without it harming those swimming.
Will borax lower pH in pool?
Borax is tremendously effective at stabilizing alkalinity and acting as a pH buffer in swimming pools. While they do raise pH levels, they also raise the total alkalinity of the water.
Can you use hydrogen peroxide in a swimming pool?
Chlorine & hydrogen peroxide can mix together just fine. To start treatment, shock your pool with hydrogen peroxide by adding 250 ml (1 cup) of hydrogen peroxide for every 1000 liters (250 gallons) of water. To maintain a clean, sparkling pool, keep your hydrogen peroxide levels between 50 – 90 ppm.
Can I use citric acid in my pool?
Citric acid is used in pool acid washes, as it is safe and effective on pool surfaces, including concrete, fiberglass, acrylic and plastic components of a pool.
Can you use hydrogen peroxide in your pool?
Can hydrogen peroxide be used in swimming pools?
What you may not know is that hydrogen peroxide is a powerful oxidizer that can be combined with ultraviolet light to disinfect swimming pools. The combination of ultraviolet disinfection with hydrogen peroxide allows pool owners to safely eliminate all chlorine in their pool or spa.
What is a substitute for muriatic acid?
Phosphoric acid. Phosphoric acid is a good substitute for muriatic acid and in most situations will clean surfaces just as well with less risk. Phosphoric acid is a main ingredient in many commercial grout and concrete cleaners that are readily available to consumers.
How much muriatic acid to add to adjust swimming pool pH?
If you have a pH reading of 7.8 or higher, and an average size (15,000 gallons) in-ground pool, you should add 1/4 gallon (a quart) of muriatic acid, and re-test after the water has circulated for an hour.
Is sodium bisulfate the same as muriatic acid?
Its strength is usually about 93-94\%. While sodium bisulfate may have a higher strength percentage, it still costs more to use than muriatic acid. For every gallon of muriatic acid, it requires about 10.5 lbs. of sodium bisulfate to do the same job.
What is the formula for muriatic acid?
The formula of the chemical compound Hydrochloric acid is HCl