What are the differences of 8086 and MC6800 microprocessor?
Table of Contents
What are the differences of 8086 and MC6800 microprocessor?
In 8086 memory divides into two banks, up to 1,048,576 bytes. The memory in 8088 does not divide in to two banks as 8086. The data bus of 8088 is 8-bit wide. It has BHE( bar ) signal on pin no….
| S.No. | 8085 Microprocessor | MC6800 Microprocessor |
|---|---|---|
| 4 | 8085 has one Accumulator Register. | MC6800 has two Accumulator Registers. |
What is a Z80 microprocessor?
The Z80 is an 8-bit microprocessor introduced by Zilog as the startup company’s first product. The Zilog Z80 is a software-compatible extension and enhancement of the Intel 8080 and, like it, was mainly aimed at embedded systems.
What are the main differences between the 8085 and 8086 microprocessor?
The 8086 is enhanced version of 8085 microprocessor. It is 16-bit processor….Differences between 8085 and 8086 microprocessor.
| Property | 8085 Microprocessor | 8086 Microprocessor |
|---|---|---|
| Data Bus Size | 8-Bit | 16-Bit |
| Address Bus Size | 16-bit | 20-bit |
| Clock Speed | 3MHz | Varies in range 5.8 – 10 MHz |
| Duty Cycle for clock | 50\% | 33\% |
What is the difference between 8085 and 8088?
The 8085 was an 8 bit data/16 bit address processor. (The same as the 8080, but with a few important differences, like a built-in serial port.) The 8088 was 8 bits data/16 bits address, the 8086 was 16 bits data/16 bits address. And the opcodes were different than the 8080/8085.
How does the Z80 work?
The Z80 uses a 16-bit program counter (PC) to hold the memory address of the next instruction to execute. This register gradually steps through memory as instructions are executed, but some instructions can alter it directly to cause the flow of the program to branch to a new location.
How many transistors are in a Z80?
Microprocessors
| Processor | MOS transistor count | Designer |
|---|---|---|
| Zilog Z80 (8-bit, 4-bit ALU, 40-pin) | 8,500 | Zilog |
| Intel 8085 (8-bit, 40-pin) | 6,500 | Intel |
| TMS9900 (16-bit) | 8,000 | Texas Instruments |
| Bellmac-8 (8-bit) | 7,000 | Bell Labs |
What are the differences between 80386 and 80486?
The 80486 architecture has been ungraded such that half of its instructions are executed in 1 clock cycle instead of two clock cycles. It has 80386 like microprocessor and 80387 like numeric coprocessor.
What are the differences between 8085 and 8086 microprocessors?
Let us take a look at the changes between 8085 series of microprocessors and 8086 series of microprocessors. The data bus is of 8 bits. The data bus is of 16 bits. The address bus is of 16 bits. The address bus is of 20 bits.
What is the difference between the Z80 and the 8080?
However, the parity flag bit P of the 8080 (bit 2) is called P/V (parity/overflow) in the Z80 as it serves the additional purpose of a twos complement overflow indicator, a lacking feature in the 8080. Arithmetic instructions on the Z80 set it to indicate overflow rather than parity,…
What is the difference between the 8080 and 2200 microprocessors?
The 2200 design allowed 8-bit registers H and L (High and Low) to be paired into a 16-bit address register HL. In the 8080, this pairing was added to the BC and DE pairs as well, while HL was generalized to allow use as a 16-bit accumulator]
What is the difference between mc8085 and MC6800?
8085 has one Accumulator Register. MC6800 has two Accumulator Registers. 8085 has five interrupts. MC 6800 have two interrupts. It has total 674 Instructions. MC6800 has total 72 instructions. It is a 16 bit microprocessor and it is first 16 bit microprocessor after 8085 (8-bit).