How much power can a b230 make?

A b230ft block with good rods ,pistons and crank will hold for 600-700hp.

Is the Volvo 240 an interference engine?

RE: interference or non-interference All the Single overhead cam engines they are Non-interferance engines. All of the Double overhead cams are. All the 240,740,940 with the SOHC are Non-interferiance The 16Valve is an Interferance engine.

What Volvos had the red block?

Introduced in 1988 for the 740 GLE (and later used in the 940/960), The 16-Valve Redblock motors were offered in both a 2.0–litre Turbo (B204FT/GT) and a 2.3–litre 155 PS (114 kW) Naturally aspirated version (B234F). The head was designed for Volvo by either Cosworth or Porsche.

Is 145 hp good?

Right between 200 and 300 is a good amount of horsepower for a car. However, the average sedan will fall between 200 and 300 horsepower, a sweet spot for vehicles and driving conditions.

What is a non interference engine?

Put simply, in a non-interference engine, when the piston is at top dead center (TDC), it will never go higher than a fully open valve; that is, the piston can never “interfere” with the valves. Conversely, in an interference engine, the piston could occupy the same space as an open valve.

Is Volvo s60 interference engine?

Volvo engines are interference motors, meaning that the internal engine parts have zero room for error.

What is a Volvo white block?

Volvo “N” Whiteblock. The official designation of what is now known as the White block engine was the “N” engine. These new motors would also use a timing belt with a decent lifespan of some 50,000 miles to it. On paper, the new engine looked promising.

What does red block mean?

Red Block is an extension to block users from Twitter. It can use as replacement of Twitter Block Chain. It can blocks followers/followings, or block retweeters/likers to specific tweet.

Is 200 hp fast?

Horsepower is undeniably attractive, and these days even the most basic vehicles have the horsepower necessary to pass most vehicles on the highway. As such, horsepower under 200 can be quite good. This level is sufficient for drivers who don’t actively seek road thrills.

How do I know if my engine is interference or non interference?

The difference between an interference and non-interference engine is whether there is a gap between the valve that is fully open and the piston that is in the top position. If there is a gap, the engine is called a non-interference engine. If there is no gap, it is an interference engine.

What is the difference between an interference and non interference motor?

Interference engines are 4-stroke engines that open one or more valves to fully accommodate the area in which the pistons enter. In comparison, non-interference engines feature pistons that do not travel into the open valves.

What kind of engine does a Volvo 240 Turbo have?

The Volvo 240 Sedan (244) Turbo has a Inline 4, Petrol engine with 2127 cm3 / 129.8 cu-in capacity. How many horsepower (hp) does a 1982 Volvo 240 Sedan (244) Turbo have?

How to increase the performance of a Volvo 240?

The nice steady boost to rpm characteristics of the supercharger make them easier to map. Adding forced induction will usually require a lower compression ratio or water injection. Volvo 240 Wheel modifications. Alloy wheels will help the brakes cool down and are usually lighter than the steel ones. Large 240 alloy wheels can decrease performance.

Is it possible to convert a Volvo 240 to T5?

We have heard of T5 conversions in the 240 but an easier route is to get a 2.2 Turbo engine and mate this to the rear axle of a larger volvo. The turbo engines are pretty easy to mod and give fairly substantial power gains. Volvo 240 Tuning modifications.

How good are the 240cc engines?

They also make stunning sleepers, as people do not expect a 240 to be sporty! Top end power should be your overall aim on the 240 with a nice fat peak torque band.