Guidelines

How much dirt is there in a hole three feet deep 6 feet long and four feet wide?

How much dirt is there in a hole three feet deep 6 feet long and four feet wide?

Dirt can be present in the hole and the volume of the hole must be equivalent to the amount of the dirt. As we know, volume of a hole is height * width * depth, the volume = 3ft x 6 ft x 4 ft = 72 cubic ft.

How much dirt is in a hole 5 feet wide and 4 feet deep?

It would be 80 cubic ft . Dirt volume is usually given in yards . And actually it refers to cubic yards .

How much dirt is there in a hole 4 feet deep and 2 feet wide?

Answer to this Awesome How Much Dirt Is In A Hole 4 Feet Deep And 2 Feet Wide? Riddle is None. Still, wondering why?

READ ALSO:   Do you need a car when visiting Philadelphia?

How much dirt is in a round hole that is 7 feet deep with a diameter of 4.5 feet?

Digging Dirt How much dirt is in a round hole that is 7 feet deep with a diameter of 4.5 feet? None at all. The hole is made by digging dirt out, so… the hole is empty.

How much dirt is in a hole that is 3 feet deep and 6 inches in diameter?

3 x 6 = 18 x 4 = 74 cubic ft of dirt could fit into that hole compressed .

How much dirt is in a grave?

Today, individual states set the depth of a grave. Many say 18 inches of dirt, just a foot-and-a-half, on top of the casket lid or burial vault is fine. That’s not six feet down, it’s four feet.

How much dirt does it take to fill a hole calculator?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.

How much dirt do I need to fill a hole?

Calculate the volume of dirt needed to fill in the hole using pi (3.142) times the square of the radius times the depth. For this example, you would multiply 3.142 by the square of 30 by 30 to obtain the volume. This yields 3.142 times 900 inches times 30 inches, or 84,834 cubic inches.

READ ALSO:   What is difference between MySQL and DBMS?

How many pounds of dirt are in a grave?

A cubic foot of soil (we won’t factor in possible gravel and rocks) weighs between 80 and 115 pounds, depending on how tightly it’s packed. Assuming the coffin is buried about six feet under, and is the standard size of 2.5 feet by 2.5 feet by 7 feet, that would put almost 750 pounds of dirt on top of the unlucky lady.

How much dirt does it take to fill a hole?

How much dirt is there in a 3 foot deep hole?

Riddle of the Day: How much dirt is there in a hole that is 3 feet deep, 6 feet long, and 4 feet wide? None, because a hole does not have any dirt inside.

What type of dirt do you need to fill holes?

The type of dirt you need depends on what your project involves. For filling holes, you will want fill dirt — however, the specific type depends on your project. Types of fill dirt include: Fill sand, like fill dirt, is used to fill low areas, but fill sand and fill dirt are very different.

READ ALSO:   What are the skills required to be a good customer service representative?

How do you find the square footage of a hole?

Determine the Total Square Footage (Area) Once you have the length and width measurements, determine the square footage of the surface by multiplying the length times the width. For example, you are filling a hole that is 10 feet long and 4 feet wide, the total square footage is 40 square feet (10′ x 4′).

How much does 72 cubic yards of dirt weigh?

Depending on the dirt type there is a swell factor. 2.6667 cubic bank yards weighs 5.333 tons. Loose yards with the swell factor equals still only weighs 5.333 tons but the volume has grown to 3.3334 cubic yards to haul off. 72 cubic feet bank yards turns into 90 cubic feet of loose yards to haul off.