How do you adjust the tension on a dishwasher door?

If the door closes too quickly, decrease the spring tension by moving the spring end toward the front of the dishwasher. If the door falls open, increase the spring tension by moving the spring end toward the back of the dishwasher. Springs should be in the same notches on the left and right sides.

How do you fix a crooked dishwasher door?

To correct:

1. Open the door slightly to about a 15 degree angle from the tub.
2. Lift the door and move it back onto both hinges.
3. When the door properly seats into place, you will hear a loud click. The door should now open and close freely.
4. If the door is not opening and closing smoothly, repeat these steps.

Can dishwasher doors be adjusted?

The hinges on the dishwasher allow you to raise and lower the door. When the door is open, it should be horizontal to your floor, so when you pull your bottom rack from the dishwasher, the door supports it. You can adjust the dishwasher door to avoid damage.

What causes a door not to latch?

When a door doesn’t latch properly, it’s usually because the door has sagged in the opening, making it so the strike doesn’t line up with the hole in the jamb of the door, called the strike plate mortise.

Why is my dishwasher door crooked?

If your dishwasher door is not aligned or appears to be crooked, it may be because the door has come off one of its hinges. A misaligned door can cause leaking from around the door. To verify, open the door slightly and check both hinges. Lift the door and move it back onto both hinges.

How do I test my dishwasher door latch?

Simply open the door, close the latch and select a cycle and depress the switch. Note that if the test is successful, with the door open, the dishwasher will operate and water may spray out. Make sure to first remove all tools from inside the dishwasher. Do not reach inside the dishwasher during the test.