How do I rehydrate my deck?

Answer: Powdered laundry detergent and hot water are usually enough to clean a moderately dirty deck. But if the deck is older, it might need a chemical wood brightener along with a pressure-washing. Once it’s clean, moisturize the wood with an oil-base stain or wood preservative.

How do I make my deck look new?

1. SCRAPE OFF LOOSE FINISH. Remove loose paint or opaque deck stain with a paint scraper.
2. SCRUB THE SURFACE. Use a stiff bristle brush to remove flaking stain or dirt.
3. APPLY CLEANER. Apply a deck brightener/refinisher product to wood surfaces.
4. POWER WASH DECK.
5. APPLY FINISH.
6. USE A BRUSH.

How do I make my wood deck look new?

Wood Deck Maintenance: Simple Tips to Keep Your Wood Deck Looking New

1. Be Sure to Sweep Away Debris. When your home has a wood deck, it’s important to keep it free from debris like leaves, pollen, dirt, and dust.
2. Keep It Clean and Sealed.
3. Make Minor Repairs.
4. Maintain with High-Quality Deck Stain.

What is the best wood deck restore product?

The best deck paint of 2021

• Best overall: Kilz Over Armor Wood/Concrete Coating.
• Best to revive old wood: Rust-Oleum RockSolid 20X Deck Resurfacer.
• Fastest-drying wood stain: BEHR PREMIUM Transparent Quick Dry Oil Base Wood Finish.
• Highest rated: BEHR PREMIUM Porch & Patio Floor Paint.

How do you make pressure treated wood look good?

Allow the wood to dry completely and otherwise prepare the same ways you would when staining. To help the paint adhere, use a bristle brush to coat the surface with a primer designed for exterior use on pressure treated wood. Using a brush, apply at least two coats of latex paint to see best results.

How do you refresh a wood deck?

SCRAPE OFF LOOSE FINISH

1. SCRAPE OFF LOOSE FINISH. Remove loose paint or opaque deck stain with a paint scraper.
2. SCRUB THE SURFACE. Use a stiff bristle brush to remove flaking stain or dirt.
3. APPLY CLEANER. Apply a deck brightener/refinisher product to wood surfaces.
4. POWER WASH DECK.
5. APPLY FINISH.
6. USE A BRUSH.

How do you clean a deck without damaging the wood?

Make sure the cleaner does not contain bleach, as bleach can damage the wood over time. For an all natural option, mix 1 cup white distilled vinegar with 1 gallon water to make a vinegar cleaning solution. Apply the cleaning solution to the deck. Use the pressure washer to apply the cleaning solution to the deck wood.

How long does it take for decking to dry after cleaning?

The deck may take a day or two to dry, depending on how sunny it is outside. If you used a vinegar cleaning solution, the vinegar smell should dissipate as the deck dries. Once the deck dries, you can replace any wood board that are rotting.

How do I know if my deck repels water?

Try a simple test to see if your deck repels water or needs staining. Sprinkle water on the wood: if the wood absorbs it within 10 minutes, plan to stain as soon as possible. If the water pools on the wood surface, the need for exterior stain is less urgent. A stained wood deck should be maintained every one to three years.

What is the best way to restore an old deck?

Restore an old wood deck, even if it’s worn, cracked and splintery. Simply paint it with a thick, acrylic deck restoration coating, which will create a smooth surface that lasts for years. By the DIY experts of The Family Handyman Magazine