How do I fix the orange light on my Canon printer?

Alarm Lamp Flashes Orange

1. Power Lamp Flashes Green and Alarm Lamp Flashes Orange Alternately.
2. A printer problem has occurred.
3. Disconnect the printer cable from the printer, turn the printer off, and then unplug the printer from the power supply.
4. Plug the printer back in and turn the printer back on.

Why am I getting an error message on my Canon printer?

If trying to print produces an error message on your computer, take note of it. Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you’re trying to print. The ink for your printer might be running low and may need to be replaced.

How do I fix my Canon Pixma printer not responding?

Fixes to try

1. Do some basic troubleshooting.
2. Run the printer troubleshooter.
3. Restart the Print Spooler service.
4. Configure the correct printer port for your printer.
5. Update your printer driver.

What does the orange triangle mean on a Canon printer?

The orange triangle with the lightning bolt comes on when the printer is plugged in. The white light above the power button is on, but the printer is otherwise dead. I haven’t used the printer that often in the past year, and just replaced the original ink cartridges last week.

What does the yellow light mean on my Canon printer?

When an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. When an error occurs, the Alarm lamp flashes orange and a Support Code (error number) is displayed on the computer screen.

How do I get my printer out of error state?

Sometimes, simply restarting both your computer and printer can be the solution to the “printer in error state” issue. Power off your printer and computer completely, leaving them in this state for a few minutes, then turn them on again to see if the problem is gone.

Why is my printer showing error in printing?

If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.

How do I reset my printer to factory settings?

1. Touch or swipe down the tab at the top of the screen to open the dashboard on the printer control panel.
2. Select “Setup” and then select “Printer Maintenance”
3. Select “Restore” and then select “Restore Factory Defaults”
4. A message appears stating that the factory defaults will be restored.

What to do if Canon printer is not printing?

If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly.

Why is my Canon printer connected but not printing?

The key factors for the issue Canon Printer Won’t Printing are: the print jobs stuck in printer queue, the paper jams disable the printer’s ability to print, the out-of-date printer driver, low ink cartridge, and faulty network connection. These are the main possible reasons of not allowing the printer to print.