How do I connect my amp to my speakers to my computer?

The easiest way to connect the audio output of your computer is to use the “line” output of your sound card. We recommend a stereo 3.5mm mini phone plug to dual RCA cable or mini plug to dual RCA jack adapter with a RCA jack stereo cable to go to the audio input of your sound system, such as the “aux” input.

Can you connect an amplifier to a computer?

If your receiver or amplifier has a USB plug, then you can simply use a USB cable between it and your computer. As with method 2 above, devices only have this jack if they have an onboard DAC. If your amplifier or receiver has an Ethernet jack, you can connect your computer to it with an Ethernet cable.

How do I connect my laptop to speakers and amplifier?

If you’re connecting your laptop directly to your amp, you will need a 3.5mm cable. Simply connect the 3.5mm cable on the back of the amplifier where the label marks auxiliary. Next, connect the other end to the auxiliary input of your computer or laptop. Most of these cables will come in a short length alternative.

Can you hook a amp up to speakers?

Connect the RCA, speaker, and remote turn-on leads to your amp. Feed the RCA cable along the bottom of the doors, then plug it into the back of the amp. Once you’ve done this, plug the speaker and remote turn-on leads into the back of the amp. These leads connect your car’s stereo/receiver to your amp.

Can I connect regular speakers to my computer?

Rear speaker jacks: The standard PC setup is to plug a set of stereo speakers into the audio output jacks on the I/O panel, located on the back of the typical PC. USB speakers: You can plug USB speakers or headphones into any USB port on the computer.

How do I connect regular wired speakers to my computer?

Connect a set of RCA-type audio cables to a set of free audio input jacks on the back of the amp. Make a note of which set of jacks (such as Aux, or Auxiliary) is being used for the connection. The red plug on the cable attaches to the right audio jack. The white plug attaches to the left.

How do you set up a wireless speaker?

Here’s how to set up wireless speakers. Put the speakers on a flat and secure surface. Keep the speakers about half an inch (10 mm) away from the system for proper ventilation. Place your TV, stereo or VCR speakers (front, center and surround) approximately the same distance from where you will be sitting.

How do I hook up an external speaker to my computer?

Plug in the cable from the right speaker to the laptop’s headphone jack, typically along the left edge of the keyboard. Step. Insert the power plug on the end of the transformer cable into the DC jack at the back of the right speaker and plug the other end into a wall outlet. Step.

Can you hook amp up to powered speakers?

“Physically it is possible to connect an amp to active speakers but it is ABSOLUTELY NOT recommended as potentially you will ruin your powered speaker and possibly your amp”, the golden rule is Power + Power = Disaster. Always remember passive speakers require a power amp and active speakers do not.

How do I hook up speaker wires to a receiver?

Attach a receiver to the clips on each speaker with a pair of speaker wires, using the red wire for the right channel. The wire length can be as short as desired, so long as it connects between the receiver and the speaker.