How do I clean the LCD on my Canon camera?

To clean the LCD of the camera, wipe the screen using a microfiber cleaning or soft damped cloth. Do not use any solvents or liquid-based cleaners. Using these substances may cause the LCD screen coating to peel off.

Can see dust through viewfinder?

Sensor dust can never be seen through the viewfinder, it only shows up in images. Even then, you might need to zoom in to 100\% to see it. Larger dust particles and hair can be visible right away without having to zoom in (see example image below).

How do you get dust out of the inside of a camera lens?

Remove as much dust and dirt as possible from the lens with a blower or soft-bristled brush. Apply a few drops of lens cleaning solution to a lens tissue or cleaning cloth. Using a circular motion, gently remove oil, fingerprints, and grime from the lens surface, working from the center outward.

How do you clean the dust on a Canon viewfinder?

If it’s on the exterior, simply moisten a cotton swab with lens cleaner and wipe away the dirt. Dry with another cotton swab or lens cloth. If the dirt is on the mirror, it is still doable, but requires very careful cleaning. Once you have accessed the mirror, use the air bulb on the lens brush to blow the dust off.

How do you clean the inside of a viewfinder?

And here’s the steps:

1. Use air blower to remove large dust clumps from the glass.
2. Hold cotton swab a few inches away from lens-cleaning solution sprayer and spray it once.
3. Gently rub away the grease and dirt from the viewfinder with the wetted swab with light circular motions.

How do I test my camera sensor for dust?

To check for sensor dust, set your camera to Aperture Priority mode, then select a narrow aperture, such as f/16 or f/22. Using a telephoto lens or a zoom lens set to the longest focal length, take a photo against a white wall at the minimum focusing distance from your subject.