How configure DHCP static IP in the computer to the LAN?

To enable DHCP or change other TCP/IP settings

1. Select Start , then select Settings > Network & Internet .
2. Do one of the following: For a Wi-Fi network, select Wi-Fi > Manage known networks.
3. Under IP assignment, select Edit.
4. Under Edit IP settings, select Automatic (DHCP) or Manual.
5. When you’re done, select Save.

How does DHCP work on LAN?

* DHCP: In order to access the network with such devices as your computer, they need to be assigned with an address on the network (an IP address). * DHCP is a mechanism for automatically assigning IP addresses to networked computers from a server which manages IP addresses.

How do I set multiple IP addresses on one LAN?

How to assign multiple IP addresses to the same NIC

1. Choose Settings -> Network Connections on the Windows Start menu.
2. Right-click on the Local Area Connection, choose Properties.
3. Highlight Internet Protocol (TCP/IP), click Properties.

How do you configure the second IP address and subnet mask for LAN interface?

Configure a Secondary Network

1. Select Network > Interfaces. The Network Interfaces page appears.
2. Select the interface for the secondary network and click Edit.
3. Select the Secondary tab.
4. Type an unassigned host IP address in slash notation from the secondary network. Click Add.

How do I fix DHCP is not enabled for local area connection?

Right-click Local Area Connection and select Properties. Highlight the Internet Protocol (TCP/IP) option and click the Properties button. If you want to enable DHCP, make sure Obtain an IP address automatically is selected, and Obtain DNS server address automatically.

How do I set up DHCP on my computer?

Click Settings. Select the DHCP tab in the Settings window. Set the “IP pool starting address” to the address you want the first computer to use DHCP to have. (192.168.0.100 if you’re not sure!) If you have a DNS server on your network, or one accessible to the machines on your network, enter it’s IP address in the “WINS/DNS Server” box.

How do I set up dynamic host configuration protocol (DHCP)?

In the Networking Services dialog box, click to select the Dynamic Host Configuration Protocol (DHCP) check box, and then click OK. In the Windows Components Wizard, click Next to start Setup.

How do I configure a DHCP server on a Cisco router?

When you configure a DHCP server, you must configure the server properties, policies, and DHCP options. Note Whenever you change server properties, you must reload the server with the configuration data from the Network Registrar database. The Cisco 870 series access routers support four Fast Ethernet ports on which you can configure VLANs.

How to configure a LAN with DHCP and VLANs?

Configuring a LAN with DHCP and VLANs The Cisco 870 series routers support clients on both physical LANs and virtual LANs (VLANs). The routers can use the Dynamic Host Configuration Protoc ol (DHCP) to enable automatic assignment of IP configurations for nodes on these networks.