Do I need to varnish polymer clay?

The short answer is no. It’s not necessary to seal polymer clay pieces because polymer clay is both durable and water resistant. Depending on the look you want to create, you may only want to sand and buff your polymer clay pieces. Only when you use additional effects such as resin is it necessary to seal the piece.

What varnish should I use on polymer clay?

Matte varnishes are perfect for preserving a natural look in your polymer clay projects because they add no shine whatsoever. And, unlike buffing waxes, matte varnishes will protect your surface effects. If you’re into natural looks, and use a lot of surface effects, matte varnish is the sealer for the job.

Is acrylic varnish good for polymer clay?

Acrylic varnish can be used on all kinds of air dry, oven cured or kiln baked clays. Add a durable seal or finish to unbaked or baked polymer clay items with these compatible acrylic water-based finishes. Apply thin washes with a small brush.

What is a good finish for clay?

sealing polymer clay with gloss varnish Gloss varnishes are great for sealing your surface effects. They give a shiny finish and are easy to use. However, they are notorious for reacting with polymer clay and mixed-media, so you have to take care to use the right one.

Can I use varnish on polymer clay?

Adding a clear coating, glaze, or varnish will not make a polymer clay project more durable, waterproof, weatherproof, or heatproof. Polymer clay is not glossy after baking. You can sand, buff, and polish the clay itself (see below), or you can apply a glossy varnish.

Can I use clear nail polish on polymer clay?

It seems like such a simple solution to use nail polish to accent your polymer clay creations. Or use clear nail polish as a glaze. Don’t do it. The solvent in nail polish will begin to soften and dissolve your polymer clay, even baked clay, making it sticky and gooey over time.

Can you polyurethane varnish on polymer clay?

Varathane Polyurethane Gloss -This much-loved polymer clay sealer is dry and lovely on all brands of clay.

What can I use to seal polymer clay?

The short answer is, it depends. You can use a Wax, Acrylic Sealer, Varnish or Liquid Epoxy. If you want a smooth finish, then use sandpaper and wax to seal your Polymer Clay and if you painted your clay, then you should seal it with an Acrylic Sealer or Varnish.

How do you make polymer clay shiny without glaze?

Polymer clay is not glossy after baking. You can sand, buff, and polish the clay itself (see below), or you can apply a glossy varnish. To make your clay project less shiny, you could apply a matte varnish. Note that adding a glossy varnish can make translucent polymer clay seem more clear.

How do you prevent fingerprints from polymer clay?

-Use cornstarch or water: Rub the surfaces of your fingers and palms with cornstarch to avoid fingerprinting your clay. -Smooth fingerprints away with oil: Rub only a couple of drops of mineral or baby oil on polymer clay with your finger to erase any fingerprints.

What is the top coat for polymer clay?

Best Sealer by Clay Brand

• PYM II.
• Sculpey Satin Glaze.
• Polycrylic Clear (satin and gloss)
• Varathane (satin and gloss)
• Final Coat (both semi-gloss and low-gloss)
• Cernit Matte Varnish.
• Swellegant Sealant.
• DuraClear Ultra Matte Varnish.