Can I replace a 13A fuse with a 5A?

Re: Can I use a 13A fuse in a 5A plug? No. You must use a 5A fuse. Using A 13A fuse is a fire risk.

What is the maximum wattage for a 13 amp plug?

3000 watts
It is important to never overload a plug socket, which is 3000 watts = 13 Amps. Some appliances use more than others. Use the calculator on this page as a guide. Overloading electrical sockets can cause plugs to overheat and result in fire.

Why does my 13 amp plug get hot?

Overloaded Plug People assume that a 13A plug can take just that – 13A (3,000W). However, in reality the maximum safe limit is 12.6A (2,900W) and only for a short period of time, such as when boiling a kettle. Over longer periods loads as high as 2,900W will lead to the plug becoming warm.

Can you put a 3 amp fuse in a 13amp plug?

A 3A fuse is the safest to use and should be used for appliances at 700w or less. Appliances rated above 700w should use a 13A fuse. Be extra cautious when using a 13A fuse and try using a 3A fuse if and when it’s possible.

What happens if I put a lower amp fuse?

Do not use a fuse with a lower rating– don’t put a 20 amp fues in a 30 amp circuit–because it probably will blow prematurely. Conversely replacing a 20-amp fuse with one rated at 30 amps is dangerous because it may not blow soon enough and damage an electrical component or start a wiring fire.

What happens if I use the wrong fuse?

Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.

Is it OK to plug an extension into an extension?

Only use one socket extension lead per socket and never plug an extension lead into another extension lead. This will put less strain on the wall socket. Some block adaptors do not have a fuse, which increases the risk of overloading and fire.

Is it bad to use a higher amp fuse?

If you replace a fuse with a higher amp one it will work but create an unsafe circuit. It could cause a failure of the device burn it up, start a fire. The fuse is designed as a safety device. It should not only be the correct amperage but also the correct voltage and fast or slow blow.

Can I use a 13amp plug?

Plugs for appliances rated between about 700 watts and 3000 watts (the maximum rating of a wall socket) should be fitted with a 13-amp fuse (coloured brown). 13A Fuse – Washing machine, dishwasher, microwave, kettle, toaster, iron.