Are sliding miter saws less accurate?

Chop-cutting accuracy at 90° was on par with other saws at 1/256 inch in 4 inches and slide accuracy was good at 1/128 inch in 12 inches. While the 90° straight cuts were good, slide miter cuts were only fair. The blade shows some measurable and visible wobble and the head has some deflection.

Why should you never pull the sliding compound miter saw when you are making a cut?

Sliding miter saws are designed to cut on the push stroke. Pulling a miter saw through the cut results in a climb cut that could cause the blade to rise up out of the wood and chase after you. The positive hook of the teeth is just aggressive enough that you can push through the wood easily and still maintain control.

Should I wear gloves with a miter saw?

Don’t wear gloves, loose clothing, jewelry, or any dangling objects when operating a miter saw. 3. All guards must be in place and operating.

What is the advantage of having a sliding miter saw over a miter saw?

The most common reason a sliding miter saw is used than that of its non-sliding counterpart, is because of this sliding versatility, as it allows you to work with larger boards, and can assist in projects that are just too difficult to pull off with a non-sliding miter saw.

What is the advantage of a sliding miter saw?

They can quickly create bevels at any angle. Sliding compound miter saws have all the versatility of compound miter saws and a sliding feature, similar to a radial arm saw, allowing you to move the blade forward and backward. The major advantage of the sliding feature is the increased length of cut it provides.

What is the purpose of a sliding miter saw?

A sliding miter saw is a type of miter saw that adds rails to let the saw blade slide front to back across the wood. It gives you a much greater depth of cut than the same size miter saw without rails. Most sliding miter saws also include the ability to make a compound cut.

What is the best miter saw blade to cut dadoes?

The best blade for these cuts would be an FTG; flat top grind. That’ll leave you with a nice flat bottom on the dado. If you don’t have that particular blade, don’t sweat it. You can still make dadoes. You just won’t get a dead flat bottom. A miter saw will do lots more than cut dadoes, of course. Want to learn more?

Do you need a dado head on a table saw?

No need to put a dado head on your table saw, or set up a router bit in a hand-held router or on a router table. If your miter saw has the right flip down stop, you can use it to make dadoes. If your miter saw has a flip down stop, you can use it to limit how far the blade will penetrate into your material.

Can you use a router bit on a miter saw?

Yep, on your miter saw. No need to put a dado head on your table saw, or set up a router bit in a hand-held router or on a router table. If your miter saw has the right flip down stop, you can use it to make dadoes.

How do you use a flip down miter saw?

If your miter saw has a flip down stop, you can use it to limit how far the blade will penetrate into your material. The combination of the flip stop and, on most saws, a bolt, lets you dial in depth of cut pretty accurately. Of course when the flip stop is out of the way, you can cut full depth.