How do I set up a new Huawei switch?

Huawei Switch Configuration Tutorial Basic

1. Step 1: Connect the COM port on the PC and the console port on the switch by a cable.
2. Step 2: Power on all devices to perform a self-check.
3. Step 3: Run the terminal emulation program on the PC, setting the communication parameters as follows: -Baud rate: 9600 bps. -Data bit: 8.

How can create access port in Huawei switch?

For access or QinQ ports:

1. Run the port default vlan vlan-id command to add a port to a specified VLAN. To add ports to a VLAN in batches, run the port interface-type { interface-number1 [ to interface-number2 ] } &<1-10> command in the VLAN view. NOTE:
2. Run commit. The configuration is committed.

How do I save my Huawei switch settings?

Procedure

1. Save the configurations automatically. Run system-view. The system view is displayed. Run set save-configuration [ interval interval | cpu-limit cpu-usage | delay delay-interval ] *
2. Save the configurations manually. Run save [ all ] [ configuration-file ] The current configuration is saved.

What is the default username and password for Huawei switch?

Enter the default user name admin and default password [email protected] and select the language on the login page. Then click GO to display the web-based configuration page. Configure the switch.

How do I clear my Huawei switch settings?

Delete all Configurations of Huawei Switch:

1. Restart the Switch and press Ctrl+B to enter the BootROM menu, and then enter the default password huawei / [email protected].
2. Press Ctrl+Z to enter the hidden menu, and then select option 2 to enter flash memory.
3. Delete the vrpcfg.

How do I login to a switch?

To manage your switch through a web browser in the host PC:

1. Make sure that the route between the host PC and the switch is available.
2. Launch a web browser.
3. Enter the switch’s IP address in the web browser’s address bar.
4. Enter the username and password (both admin by default) in the pop-up login window.

How do I assign a management IP to a switch?

Configure an IP address on a switch

1. enter the VLAN 1 configuration mode with the interface vlan 1 global configuration command.
2. assign an IP address with the ip address IP_ADDRESS SUBNET_MASK interface subcommand.
3. enable the VLAN 1 interface with the no shutdown interface subcommand.

How do I change the trunk port to access port on a Huawei switch?

You can run the port link-type { access | trunk | hybrid | dot1q-tunnel } command to change the link type of the interface. Change the link type of the interface to access.

What is port link type?

Description. Use port link-type to configure the link type of a port. Use undo port link-type to restore the default link type of a port. By default, any port is an access port. The configuration made in Layer 2 Ethernet interface view applies only to the port.

How do I save switch settings?

Save the Configuration Type “copy running-config startup-config” at the command line and press return on the keyboard. This will copy the current switch configuration to the non-volatile memory, which is memory that will retain its data even without power applied to it. 3.

How do I save my running config to startup?

Save running config on Cisco device Use the command copy running-config startup-config (copy run start) to overwrite the current startup config file with what is currently in the running configuration file.