How much are industrial sewing machines?

A good quality basic sewing machine will cost just over $100 with specialty machines and those with more features costing anywhere from under $200 to more than $600. Most good quality industrial sewing machines are more than $1,000.

What are the steps in threading the upper part of the sewing machine?

To set up the upper thread for your machine, first place a spool of thread on your machine’s thread pin (also called a spool pin or spool holder). Thread through the thread guide. Pull the thread to the left of your machine and thread it through the thread guide. Pull the thread through the U-shaped guide.

Can I use any needle for my Juki sewing machine?

Home sewing machine needles that would would purchase at a fabric or craft store WILL NOT WORK. Holds the bottom thread; Like the thread, you must make sure that your bobbin is the correct one for your Juki machine – NOT ALL BOBBINS ARE CREATED EQUAL and using the wrong one can damage your machine.

How to thread a sewing machine before sewing?

Bringing up the bobbin thread is the final step in threading your machine before sewing. You will be using your hand wheel for this part of the process. Keep the bobbin cover plate open. With your left hand, pull the top thread gently to the left/back and hold it in place.

How do you put a bobbin on a sewing machine?

Bring the thread down to the bobbin winding area and place the end through the small hole. Loop the thread around the back of the wheel and then towards the front. Pull it tightly so the thread is deep in the groove. Grab your bobbin and place it on the black knob for winding.

Are there different models of industrial Juki machines?

There are a variety of models of industrial Juki machines (older ones, newer ones, etc.), but even if you have a slightly different machine than the one used here, the basic principles will be the same. I will go through the process step by step.