Can you mix 2 different brands of RAM?

Can You Mix Different RAM Brands? In short, the answer to this question is: yes. No matter the brand, speed, and size of the RAM, you theoretically can get it to work on your system; though it may prove to be problematic. Also, depending on the setup & workload, you may not even notice a difference in performance.

Is mixing different brands of RAM bad?

Your computer is likely to run fine if you mix different RAM brands, different RAM speeds, and different RAM sizes. However, if you are going to buy a new RAM stick, it would benefit you to just buy something that is compatible. So at the end of the day, yes you can mix RAM brands as long as you are careful.

Can you mix 2 8GB RAM?

Even if you have a stick of RAM that’s slower than the other, your machine will almost certainly accept the two of them together just fine. While it’s true that your slowest stick of RAM brings all others down to its speed, in general RAM speed doesn’t matter that much for overall system performance.

Can you mix 2 8GB and 16GB RAM?

Yes you can mix memory modules. However keep in mind, your system will only be as fast as “the slowest member”. I encountered a laptop where the owner had swapped memory modules from other systems to end up with 24GB of memory. It is doable to do 8GB & 16GB in a two slot DDR3 & 4 systems.

Can I use 2x 4gb and 8GB RAM together?

Yes you can. And you’ll get the full 16 gb too. But here’s the thing, Games use dual channel memory to collectively read and write information. Using an 8gb stick with 2x4gb sticks will prevent dual channel interaction as the games will only be allowed to communicate with either the 8gb stick or the 2x4gb sticks.

Is it OK to mix RAM speeds?

You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. If you do mix speeds, the modules will all run at the speed of your slowest modules.

Can I mix 2 4GB RAM with 2 8GB RAM?

As long as you have 4 available memory slots, yes you can use 2 8GB memory modules and 2 4GB memory modules at the same time. This does ASSUME that both sets of memory are compatible.

Can you mix and match different brands of RAM?

How about mixing brands of DRAM? Theoretically, if the other traits (generation, speed, latency, voltage) are the same, there should be no issue using DRAM from two different brands. Though some older DDR3 systems require matched sets of memory.

Will 8GB of RAM work with 16GB of RAM?

Iirc the other 8GB of RAM will work, but the speed of all of the ram will be reduced to whatever the lowest clock speed your ram is running at. Ex: If you had a kit of 8GB of 2600mhz RAM and a kit of 8GB of 3200mhz RAM all together on the same board you’d have 16GB of RAM running at 2600mhz.

Can you mix RAM speeds?

In essence, you are doing a lot of work that you don’t need to do in order to do something that might not pay off in the end. You can mix RAM speeds, however. This is something that many people will do. You just have to be sure that you match all those important elements, including timings, voltage, and CAS latency.

Is it safe to mix different generations of RAM?

No. Don’t do it. Don’t even try. You cannot mix different generations of DRAM. In fact, you can’t install a different generation of DRAM in your system at all. The reason is that your motherboard is built to process one generation of memory.