What does deep mean in inches?

The back is on the opposite side (that’s the side that usually sits against a wall). From front to back is the DEPTH. So, if that is what you mean by long, then yes, front to back, it is 16 inches deep. If you mean from the floor (under the wheels), to the top (where you could set something on), that’s the height.

What is 6 feet tall in inches?

Feet to inches conversion table

How do you represent height in feet and inches?

Feet is typically written ft or ‘. Inches is written as in or “. For example, 3 feet 6 inches would be 3’6”.

What order is width height depth?

When you tell us the dimensions of the box, they need to be in this order, Length x Width x Depth.

What is depth measurement?

Commonly abbreviated as D, depth is a measurement of how far back a three-dimensional object is. For example, measurements of an object, such as a computer monitor, are commonly measured as (D x W x H), short for Depth by Width by Height. In the illustration, the Z-axis is the depth.

How long is 6f?

How tall is 6 feet? 6 feet is equal to 72 inches or 1.82 meters. 6 feet is also the same as 182.88 centimeters or 2 yards.

Is six feet a good height?

Six feet is still a good height, it is still a respectable height, but it is no longer a commanding presence. A good height, in a disputable generalisation, is a result of good nutrition and genes that were once favoured. The UN considers height a vital measure of a country’s nutritional standards.

How are inches written?

The international standard symbol for inch is in (see ISO 31-1, Annex A) but traditionally the inch is denoted by a double prime, which is often approximated by double quotes, and the foot by a prime, which is often approximated by an apostrophe. For example; three feet, two inches can be written as 3′ 2″.

What is the foot symbol?

ft
The foot (plural foot or feet; symbol or abbreviation: ft or the single prime ′ ) is a unit of length in the Imperial and U.S. customary systems of measurement.

How deep is 30 inches?

76.2 centimeters (30 inches) wide from side to side, 25.4 centimeters (10 inches) deep from front to back, 182.88 centimeters (6 feet) tall from bottom to top.

How many feet is 4 inches divided by 12?

Note* we achieved 0.333 ft. by taking four inches and dividing by twelve. Another example: yardage for an 80 ft. driveway, 24 ft. wide and 5 inches deep.

What is the abbreviation for length width and height?

V = Volume; L = Length; W = Width; H = Height; Volume Dimensions – Length, Width & Height. Enter the measurement of length, width and height for the rectangular shape. The following SI unit conversion factors in metres (m) are used for converting the measurement units specified for length, width and height: SI Metric Prefix Length Units

How do you convert dimensions to feet?

Start by converting all dimensions to feet. length = 36″ ÷ 12 = 3′ width = 48″ ÷ 12 = 4′ height = 24″ ÷ 12 = 2′